Ensuring that your ATV's front wheels are accurately aligned is crucial for several reasons:
Failing to adjust the wheel alignment can lead to issues such as sluggish performance or unresponsive steering due to excessive toe-in or toe-out. Adjusting your ATV's wheel alignment not only contributes to the overall performance but also safeguards against potential handling and safety problems.
Performing a front-end alignment on your ATV requires precision and the right equipment. Here's a list of tools you'll need to align your ATV's front wheels effectively:
Depending on the specific method you choose for alignment, additional tools such as straight edges or laser aligners may be required. Before beginning the alignment process, check your manufacturer's wheel alignment specifications and ensure that all tires are inflated to the recommended tire pressure.
Ensuring that your ATV's front wheel alignment is accurately set is fundamental to achieving optimal handling and minimizing uneven tire wear. A misaligned set of wheels on an ATV can lead to a host of issues, from decreased performance to unsafe riding conditions. Below you'll find simple steps for adjusting your ATV's wheel alignment, complete with instructions to secure the best possible outcome. Whether you're an avid rider or a casual enthusiast, following these guidelines will help maintain your ATV's condition and performance.
Before adjusting your ATV's front wheel alignment, ensure that it is parked on a stable and level surface. This step forms the bedrock of the entire alignment process as it guarantees accuracy in the measurements and adjustments to follow. A cement garage floor or a flat driveway is an ideal location for this activity. If you don't have access to a flat surface, use jacks or blocks to level out the vehicle on uneven ground. Additionally, stabilize the handlebars with ratchet straps to prevent movement, which could interfere with the accuracy of your adjustments.
Accurate wheel alignment begins with inflating the ATV tires to the proper air pressure. Check both front and rear tires with a gauge and inflate them to the pressure recommended by the ATV's manufacturer. Consistent tire pressure is crucial as differences can affect alignment results. Proceed with the alignment once all tires are evenly inflated.
Stabilize the handlebars by keeping them in a straight position. This can be achieved by having someone hold them steady or by securing them with ratchet straps to fixed points on the ATV. It is important not to over-tighten the straps, which could cause damage. Handlebars must be aligned precisely as they serve as the reference for the entire alignment process. Double-check to ensure that the handlebars remain motionless during the subsequent wheel alignment adjustments.
Accurate measurement is the heart of the alignment process. Measuring allows you to determine whether your problem is that your wheels are in a toe-in position or a toe-out position. Using a tape measure, you need to take front a rear measurements on your front tires. Measure from the middle of the front of the left wheel to the middle of the front of the right tire.
Then, measure distance with the rear edges of your front tires. If there is any difference in these distances, it means you do not have proper front-end alignment. To find out if your wheels are toe-in or toe-out, subtract the front measurement from the back measurement and if it is positive, your wheels are toe-out, if it's negative, your wheels are toe-in.
Once you’ve taken all the necessary measurements, the next step is to loosen the tie-rod end nuts. Typically, ATVs have right-handed threads on one side and left-handed on the other, so pay attention to which direction you are turning. Using two wrenches—one to hold the tie-rod and the other to loosen the nut—is the safer way to avoid any unintended rotation or damage to the components. This step prepares the tie-rods for the actual alignment adjustment.
Carefully adjust the tie-rods to achieve the recommended toe alignment, usually around 1/4 inch toe-in alignment for most ATVs. This involves rotating the tie rods with a wrench, often requiring only small increments at a time, such as a half-turn. It is crucial to measure after each adjustment to achieve precise alignment and to ensure that the front wheels are parallel. It's paramount that the ATV should track straight without pulling to one side when tested at a consistent speed after adjustments.
After aligning the wheels to the desired toe setting, the final step is to re-tighten the tie-rod end nuts securely with two wrenches. This action should be carried out carefully to ensure that the tie-rods do not move, potentially altering the alignment setting. Once tightened, check the toe measurement again for any possible shifts that occurred during the process.
Realigning your ATV's front wheels may seem daunting, but by following these tips, you will ensure your vehicle performs optimally on the trails.
No, adjusting the rear wheels of an ATV differs from adjusting the front. While both adjustments aim to optimize performance, they address distinct needs. Front adjustments often involve toe alignment to enhance stability and steering precision. In contrast, rear adjustments prioritize wheel alignment and wheel bearing maintenance to ensure smooth operation and prevent premature wear.
While basic principles of alignment apply to both ends, the procedures and components involved in adjusting the rear racks slightly differ from those of ATV front-end alignment. Regular maintenance and alignment checks for both front and rear wheels is a simple solution essential for peak ATV performance and longevity.
At Perfex Industries, we pride ourselves on offering an extensive range of premium ATV accessories designed to enhance every rider's experience. From rugged skid plates to protect against rough terrain to lift kits for improved ground clearance, we've got you covered.
Our selection also includes wheel spacers for added stability and various accessories tailored to fit different ATV models. Whether you're seeking enhanced performance, comfort, or safety, we have the perfect gear to suit your needs. Explore our collection today and gear up for your next ATV adventure with confidence and style!
]]>Before stepping into a dealership, arm yourself with knowledge about the different types of off-road vehicles, their features, and specifications. Familiarize yourself with the brands, models, and price ranges available in the market. Utilize online resources such as ATV Trader, Trader Interactive, and other reputable platforms to gather information on current market trends, customer reviews, and vehicle specifications. This preparation will empower you during discussions with dealers and help you make well-informed decisions.
Clearly define your intended use for the ATV or UTV, whether it be trail riding, navigating tough terrain, or utility tasks. Consider the size of the trails you plan to explore, the type of terrain you'll encounter, and the number of passengers or cargo you need to accommodate. This understanding will enable the dealer to recommend suitable models that align with your specific requirements.
Use dealer locators on official websites or platforms like ATV Trader to find reputable dealerships in your area. Dealers with positive reviews and a good reputation are more likely to provide quality service and reliable products. Additionally, consider the exposure dealerships have, as those with a wide reach and online presence are often more reliable and have a broader range of options.
Aim to engage with dealers who create a pressure-free environment. Quality dealers understand that making a significant purchase like an ATV or UTV requires careful consideration. Avoid dealers who employ high-pressure sales tactics and prioritize those who encourage open communication and provide the necessary time for decision-making.
When choosing a dealership, pay attention to the size of their showroom. A well-organized and spacious showroom is indicative of a dealer's commitment to professionalism and customer satisfaction. A dealership with a diverse range of models on display allows you to physically inspect and compare different options, making your decision-making process more comprehensive.
Once you have selected a few potential dealers, be prepared to negotiate. Request offers from multiple dealerships and use competitive pricing to your advantage. Dealers may be willing to provide discounts, financing options, or additional accessories to secure your purchase. Be assertive in communicating your budget and preferences, and don't hesitate to walk away if the terms are not favorable.
Inquire about the services offered by the dealership, such as routine maintenance, repairs, and service records. A reputable dealer should provide information on their maintenance services and ensure that the vehicles they sell have been well-maintained. Regular maintenance is crucial for the longevity and optimal performance of your off-road vehicle.
Before finalizing your purchase, conduct a thorough inspection of the ATV or UTV. Check the engine size, fuel efficiency, tire sizes, tire pressure, air filters, oil filter, fluid levels (including coolant levels), and overall condition of the vehicle. If purchasing a used ATV, request access to service records to assess the vehicle's maintenance history. This attention to detail will help you identify potential issues and ensure you are getting a reliable vehicle.
Explore online services provided by dealerships, such as virtual showrooms, online inventory, and digital catalogs. Some dealerships offer virtual tours, allowing you to inspect the vehicles remotely. Take advantage of these resources to streamline your research process and narrow down your options before visiting the dealership in person.
Stay informed about the latest trends in the off-road vehicle industry, including electric ATVs. Electric models offer environmental benefits and may be eligible for incentives or rebates. Discuss with dealers the availability and advantages of electric options, as well as any innovative features that align with your preferences.
Best time to sell your used ATV or UTV: tips for selling
All about ATV depreciation and resale value
Perfex Industries excels in providing top-notch off-road accessories to enhance your vehicle's performance and protection. Elevate your adventure with our premium lift kits, engineered for superior ground clearance and optimal suspension geometry. Maximize stability and style with wheel spacers, ensuring a wider stance and improved handling.
Safeguard your vehicle against rough terrain with durable skid plates, designed to shield critical components from potential damage. Perfex Industries stands as your go-to destination for quality accessories, offering a range that includes lift kits, wheel spacers, and skid plates to elevate your off-road experience.
Frequently Asked Questions
Consider your intended use, terrain type, and budget. Determine whether you need a utility or sport ATV, and ensure it suits your riding preferences and skill level.
It depends on your budget and preferences. New ATVs offer the latest features and warranties, while used ones may provide cost savings. Thoroughly inspect used ATVs and review their maintenance history.
Essential safety gear includes a helmet, gloves, protective clothing, and appropriate footwear. Prioritize safety equipment to ensure a secure and enjoyable off-road experience.
In the ever-evolving landscape of military operations, the strategic integration of all-terrain vehicles (ATVs) and utility terrain vehicles (UTVs) has emerged as a pivotal force multiplier. These larger vehicles, categorized as utility vehicles, have become indispensable assets, facilitating agile maneuverability and providing armed forces with a versatile and effective means of navigating challenging terrains during a myriad of missions.
ATVs and UTVs play a crucial role in infantry patrols, where mobility and speed are paramount. The ability of these off-road vehicles to traverse challenging terrains allows infantry units to cover larger areas efficiently, enhancing their situational awareness and response capabilities. The vehicles' off-road capabilities provide access to remote locations that might be unreachable by traditional on-road vehicles.
In addition to infantry patrols, ATVs and UTVs are employed in perimeter patrol missions. These vehicles enable military personnel to secure large areas swiftly, maintaining a visible presence and deterring potential threats. The versatility of off-road vehicles ensures effective coverage of expansive military bases and installations.
The use of off-road vehicles in combat missions is widespread, offering armed forces a rapid and agile means of transportation. Whether in conventional warfare or special operations, ATVs and UTVs are utilized to maneuver through rough terrains, providing a tactical advantage in diverse combat scenarios. The U.S. Special Operations Forces, in particular, leverage the capabilities of these vehicles for stealthy and rapid insertion into enemy territory.
ATVs and UTVs serve vital roles in control missions, casualty evacuation, and supply transport. The vehicles' cargo capacity allows for efficient transportation of equipment, supplies, and even injured personnel across challenging terrains. This capability significantly contributes to the flexibility and responsiveness of military operations.
Browse accessories to customize your ATV
Military-grade ATVs and UTVs are designed with enhanced payload capacity and cargo capacities to meet the specific needs of armed forces. These vehicles can carry a substantial amount of equipment, ensuring that soldiers are well-equipped for their missions. Cargo capacity is a critical factor, and manufacturers focus on optimizing this feature to enhance the vehicles' utility.
Ensuring the safety of military personnel is paramount, leading to the incorporation of roll-over protection features in off-road military vehicles. Roll cage structures, seat belts, and stringent safety standards are implemented to minimize the risk of injuries in challenging terrains. This attention to safety aligns with the standards set by organizations like the American National Standard for automotive controls and safety gear.
Military ATVs and UTVs are equipped with advanced control mechanisms, including foot controls, handlebar-type controls, and power steering systems. These features provide optimum control to the rider, allowing for precise navigation through tight spaces and rough terrains. The combination of foot pedals for controls and automotive controls contributes to the vehicles' ease of operation.
For added protection, military off-road vehicles are designed with enclosures featuring bucket seats. These bucket seats, coupled with the use of heavy-duty boots and protective clothing, offer additional safety to riders. The enclosed design provides a shield against environmental elements and enhances the overall safety profile of the vehicles.
5 ways to customize your ATV to go faster
Military-grade ATVs and UTVs highlight the ability and need to customize these extremely useful vehicles. At Perfex Industries, we have years of experience with off-road vehicles, which has put us in the perfect position to provide the best ATV and UTV accessories on the market. From lift kits to skid plates, we have everything you need to create a superior riding experience.
]]>Investing in high-quality locks is one of the most fundamental steps in preventing All Terrain Vehicle theft. Thieves often target vehicles that are easy to access, so using heavy-duty locks can act as a deterrent. Consider using a combination of lock types, including wheel locks, padlocks, and steering locks, to create multiple layers of security:
Customize your vehicle with ATV accessories
In addition to traditional locks, consider investing in modern anti-theft devices that use cutting-edge technology to enhance security.
Where you store your ATV plays a critical role in preventing theft. Consider the following tips to enhance the security of your storage area:
Understanding the importance of location and timing can significantly reduce the risk of ATV theft. Thieves often strike during vulnerable moments, so take the following precautions:
Engaging with insurance companies can provide an added layer of protection and financial security in the event of theft:
Best time to sell your used ATV or UTV
Employing common sense and creative strategies can further safeguard your ATV:
Perfex Industries stands as the premier destination for high-quality ATV accessories, ensuring your off-road adventures reach new heights. Our extensive range includes robust skid plates conquering challenging terrains, durable wheel spacers for increased modifications, and precision-engineered suspension kits for optimal performance.
Crafted with the utmost attention to detail and durability, our accessories are designed to withstand the rigors of off-road exploration, providing ATV enthusiasts with reliability, functionality, and style. You can explore our collection today to enhance your ATV's capabilities and elevate every adventure with Perfex Industries' cutting-edge accessories.
]]>Lifting your ATV involves modifying its suspension system to increase the distance between the vehicle's chassis and the ground. This customization is achieved through the installation of lift kits, which include components like extended axles, larger wheels, and upgraded shocks. The process may require specialized tools such as a spring compressor tool for suspension adjustments.
By lifting the ATV, enthusiasts aim to achieve additional ground clearance, enabling the vehicle to navigate rough terrains with greater ease. This alteration enhances off-road capabilities, providing better traction and stability. Moreover, lifting opens the door to accommodate larger wheels and tires, contributing to an improved overall riding experience across diverse and challenging landscapes.
Suspension lift kits are popular among off-road enthusiasts for their ability to provide substantial ground clearance. These kits typically include components such as lifted springs, shocks, and control arms. Suspension lifts offer a comprehensive solution for tackling various terrains, making them suitable for riders seeking versatility.
Bracket lift kits involve adding spacers between the existing suspension components and the frame. They are an entry-level option, providing a lift without the need for extensive modifications. However, bracket lifts may have limitations compared to suspension lifts in terms of off-road performance.
Portal gear lifts are advanced systems that offer both lift and gear reduction. These kits feature specialized portal boxes that lower the gear ratio, providing extra torque for conquering challenging terrains. Portal gear lifts are ideal for ambitious lift fanatics seeking maximum off-road capabilities.
Spring spacer lifts are a basic and cost-effective option for lifting your ATV or UTV. These kits involve placing spacers between the existing springs and the suspension components. While spring spacer lifts provide additional inches of lift, they may not offer the same level of performance as more advanced lift options.
Buy a suspension lift kit online
Lifting your ATV comes with a wide range of benefits. From being able to handle tough terrain to improving your overall ride comfort, here are some of the key benefits of installing a lift kit to your off-road vehicle.
One of the primary reasons enthusiasts choose to lift their ATVs or UTVs is to expand the range of terrains they can conquer. Whether it's rocky trails, muddy paths, or sandy dunes, a lifted vehicle with larger tires and improved ground clearance excels in handling diverse landscapes.
Contrary to the misconception that lifted vehicles compromise ride quality, many enthusiasts find that a properly lifted ATV or UTV can actually provide a smoother ride. The combination of larger tires, upgraded shocks, and adjusted suspension components contributes to a more comfortable off-road experience.
Lifted ATVs and UTVs are better equipped to overcome adverse conditions. Whether it's deep mud, steep slopes, or rugged trails, the added ground clearance and enhanced traction give riders the confidence to tackle challenges that would be daunting for vehicles in their stock configuration.
Lifting your ATV or UTV often goes hand-in-hand with upgrading to larger engines. The increased clearance allows for the installation of more powerful engines, boosting the vehicle's overall performance. This is especially beneficial for riders seeking higher speeds and greater horsepower for their off-road adventures.
How to install a Yamaha ATV suspension lift kit
Although lift kits can be greatly beneficial to your vehicle, you must also be aware of the safety considerations to ensure your vehicle remains safe to drive. Here are some important things to consider when installing a lift kit:
At Perfex Industries, we stand out as a premier provider of top-notch accessories, offering a comprehensive range to customize and optimize your ATV. Our lift kits are a standout feature, allowing enthusiasts to elevate their off-road experience by increasing ground clearance and conquering challenging terrains with ease.
However, we also offer a wide range of other accessories such as wheel spacers and skid plates to optimize your ride. Whether you're seeking elevated performance, improved handling, or reinforced durability, our lineup of accessories ensures that your ATV is equipped for any adventure.
The desire for a faster ATV is rooted in the exhilarating experience it provides. Riders seek the rush of wind against their face as they navigate challenging terrains at soaring speeds. Additionally, increased speed can be advantageous in various scenarios, such as outrunning adverse weather conditions, covering more ground efficiently, or simply enjoying the thrill of riding. However, it's crucial to balance the need for speed with safety considerations, ensuring a responsible and enjoyable riding experience.
Buy accessories to customize your ATV
One of the most effective ways to boost your ATV's speed is by upgrading to an aftermarket exhaust system. Stock exhaust systems are designed to meet various regulations, limiting the ATV's power output. Upgrading to a performance exhaust system enhances the vehicle's airflow, resulting in improved horsepower and torque. Choose a system that suits your ATV model for a significant boost in speed without compromising fuel economy.
Adjusting the rear sprocket is a cost-effective way to achieve a noticeable increase in speed. A larger rear sprocket effectively changes the gear ratio, allowing the ATV to reach higher speeds. Remember that altering the sprocket size is designed to affect the vehicle's acceleration, so it's crucial to find the right balance for your riding style and preferences. This modification is particularly popular among riders looking for a quick and easy way to enhance their ATV's performance.
Upgrading to a high-flow air filter can significantly impact your ATV's performance. Stock air filters may restrict airflow to comply with emission standards, limiting the engine's power output. High-flow air filters allow for increased air intake, optimizing the air-fuel mixture for improved combustion. This modification not only boosts horsepower but also enhances fuel efficiency. Regularly check and clean the air filter to maintain optimal performance in various riding conditions.
Tires play a crucial role in an ATV's overall performance, and upgrading to larger, high-performance tires can result in a substantial speed increase. Larger tires cover more ground per revolution, allowing the ATV to achieve higher speeds. However, it's essential to consider the terrain you'll be riding on, as larger tires may impact acceleration and maneuverability in certain conditions. Adjust tire pressure according to the manufacturer's recommendations for optimal performance and safety.
Many ATVs come with a throttle limiter screw, designed to restrict the vehicle's top speed for safety reasons, especially for riders with less experience. Adjusting or removing the throttle limiter screw can unlock the ATV's full power potential, providing an instant boost in speed. However, it's crucial to approach this modification with caution, ensuring that the ATV's speed remains within safe limits for the rider's skill level and the riding environment.
In Canada, there is typically no specific license required to customize your off-road vehicle. However, it's crucial to adhere to local laws and regulations governing vehicle modifications. Ensure that any customization complies with safety standards and, if planning to use the ATV on public land and roads, be aware of rules specific to road usage. Always consult local authorities, review your ATV's manual for guidance, and consider seeking professional advice to ensure compliance with applicable laws and standards.
Perfex Industries offers a diverse range of accessories tailored to enhance and customize your ATV experience. From lift kits for added suspension to skid plates for protection, we provide riders with top-quality modifications designed to optimize power delivery and boost overall ATV performance. With a commitment to quality and innovation, we stand out as the go-to destination for ATV riders looking to elevate their off-road adventures with reliable and performance-enhancing accessories.
If you're planning to take on the muddy trails, it's crucial to equip yourself with helpful tips and techniques that will ensure a successful and enjoyable off-roading experience. From proper tire selection to mastering the art of momentum, there are several factors to consider. In this article, we share valuable tips to help you navigate the mud with confidence and minimize the risks of getting stuck.
Your choice of vehicle is the first and most critical decision when planning an off-roading adventure in the mud. While a variety of vehicles can handle muddy conditions, some are better suited than others. Here are some key considerations:
Different types of off-road vehicles
Understanding ground conditions is essential for safe off-roading. Common sense plays a critical role; if the terrain appears too challenging, it's wise to avoid it or find an alternate route. Being aware of the various terrains, including mud holes, rocks, sand, and deep water, is vital, as each demands specific techniques and equipment. Additionally, consider your vehicle's ground clearance and carefully assess the terrain to avoid potential damage from sharp rocks or obstacles.
Maintaining steady momentum is crucial when navigating muddy conditions, as abrupt acceleration or deceleration can lead to traction loss. If your vehicle is equipped with traction control systems, make efficient use of them to regulate wheel spin and maintain forward motion. Avoid sudden steering movements, opting for gradual turns and terrain anticipation to prevent sliding or tipping.
When heading out, ensure you select the right gear by engaging 4WD or AWD to enhance traction, and if available, use a low-range transfer case for extra torque when tackling challenging obstacles. When using the brake pedal, exercise caution, as hard braking can result in wheel lockup and loss of control, and apply gentle pressure, even considering brake pumping as needed to ensure a safe off-roading experience in muddy conditions.
Proper gear selection is essential for effective off-roading, especially in muddy conditions. Shifting to a lower gear, typically 2nd gear, helps maintain a steady pace and prevents wheel spin by providing more torque and control. If your vehicle has a trailer brake controller, it can be manually utilized for controlling the trailer's brakes, which proves beneficial when navigating steep, muddy inclines while towing. Regular inspection of your vehicle's brake lines and hydraulic systems is crucial to ensure they are in good working condition, preventing brake failure in muddy terrains.
Explore ATV Accessories
Even with the best preparation and driving skills, getting stuck in the mud is possible. When that happens, having the right recovery gear and techniques can save the day.
Once you've successfully navigated through the mud and are back on firmer ground, it's essential to care for your vehicle and gear. Here's what to do following an off-roading adventure.
Customizing your ATV is the best way to make sure it can handle muddy terrain. Perfex Industries is dedicated to providing you with the highest quality accessories to ensure that your vehicle performs exactly the way you want it to. From suspension lift kits to wheel spacers to skid plates, we have everything you need to ensure a quality ride.
Off-roading in the mud can be safe when done with the right equipment, skills, and precautions. It's essential to be well-prepared and exercise caution.
Off-road vehicles with four-wheel drive (4WD) or all-wheel drive (AWD), high ground clearance, and specialized mud tires are typically the best for mud terrain.
Consider mud tires with deep, aggressive treads for superior traction. All-terrain tires are also an option for those who need to balance on-road and off-road performance.
ATVs (All-Terrain Vehicles) and UTVs (Utility Task Vehicles) are excellent choices for snow plowing due to several key advantages:
Customize your vehicle with aftermarket accessories
Now, let's delve into the process of plowing snow with an ATV or UTV in this step-by-step guide:
Ensure your ATV is in good working condition, with particular attention to the engine and tire pressure. Cold weather can affect the engine so consider using an engine block heater for a smoother start.
Choose a plow blade that suits your needs, considering factors such as the amount of snow, the type of snow (wet or dry), and the terrain you'll be plowing. Straight blades work well for smaller amounts of snow, while scoop configurations are effective in deep snow.
Attach the plow blade to your ATV using the provided hitch or rear hitch. Ensure it is securely fastened and properly aligned.
Use the controls provided such as electric winches or control levers to lift and angle the plow blade to your desired position. This adjustment will depend on the snow depth and the direction in which you want to move the snow.
Start your ATV and begin plowing by driving slowly and steadily in straight lines. Overlap each pass slightly to ensure complete coverage.
When you reach the end of your plowing area or need to turn around, lift the plow blade to avoid unnecessary strain on your machine and the plow system.
Continue the plowing process, adjusting the plow blade as needed, until you've cleared the desired area. ATVs with four-wheel drive and good traction can handle deep snow and heavy snowfall effectively.
Can you ride an ATV in the snow?
To make your snow plowing experience even more efficient and trouble-free, consider these additional tips:
If you want to use your ATV to plow snow, you will need to invest in ATV accessories to customize your vehicle. At Perfex Industries, we are known for our high-quality aftermarket ATV accessories and parts, engineered to improve performance, durability, and functionality. Whether you're seeking increased clearance with a lift kit or enhanced protections with a skid plate, we provide a wide range of products to meet your specific needs.
UTVs and ATVs are advantageous for snow plowing due to their versatility, four-wheel drive capabilities, compact size, and maneuverability, making them well-suited for navigating tight spaces and diverse terrains.
You can choose from straight blades, scoop configurations, and larger plow blades. The choice depends on the amount of snow, snow type, and the terrain you intend to clear.
Ensure your machine is in good working condition, pay attention to the engine, and maintain the correct tire pressure. Consider using an engine block heater in cold weather.
Whether you're a beginner or an experienced off-roader, understanding the different types of off-road vehicles is crucial for a safe and enjoyable adventure. In this article, we explore the various types of off-road vehicles, their characteristics, and the terrains they excel in. So let's dive in and discover the perfect off-road companion for your next adventure!
Off-road vehicles are designed to expertly navigate difficult terrain, from agricultural vehicles to construction vehicles, they can deal with a wide variety of situations. However, with so many different options on the market, it can be difficult to know which is best for you. That is why we have broken down 10 of the leading varieties of off-road vehicles to help you decide which is best suited to you and your needs.
All-Terrain Vehicles (ATVs) are a versatile class of off-road vehicles designed to tackle rugged terrains with ease. These agile machines are commonly employed as agricultural vehicles due to their exceptional capabilities. Featuring substantial inches of ground clearance, ATVs can navigate uneven and challenging landscapes, making them ideal for farm work.
Their compact design, robust suspension systems, and all-wheel drive provide the necessary power and stability required for various agricultural tasks, from plowing fields to transporting goods across rough terrain. ATVs have earned their reputation as indispensable off-road workhorses in the agricultural industry.
If you're looking for a versatile off-road vehicle, x4 trucks are a great option. These pickup trucks are specifically designed to handle rough terrains and provide excellent performance in various off-road conditions. One of the key features that make x4 trucks ideal for off-roading is their exceptional suspension system. The suspensions on these trucks are built to absorb shocks and bumps, allowing for a smoother ride over uneven surfaces.
When it comes to tackling sandy terrain, x4 trucks excel due to their all-terrain capabilities. The combination of their powerful drivetrain and high ground clearance enables them to traverse through sand dunes with ease. Additionally, the differential system on these trucks ensures that power is distributed evenly between the rear axles, providing enhanced traction on loose surfaces such as sand.
Dirt bikes are popular among thrill-seekers for their agility and speed. These off-road vehicles are specifically designed for navigating rough terrains, making them perfect for trail riding and motocross competitions. What sets dirt bikes apart from other off-road vehicles is their lightweight build, which allows riders to effortlessly maneuver through different terrain types.
One key feature of a dirt bike is its ground clearance. This refers to the distance between the lowest point of the bike and the ground. A higher ground clearance helps prevent the bike from getting stuck on obstacles such as rocks or tree roots. Suspension is another crucial aspect of dirt bikes. It absorbs shocks and vibrations when traversing uneven terrain, ensuring a smooth ride and reducing fatigue on the rider's body.
When it comes to exploring off-road trails, you'll find that side-by-sides or UTVs offer a comfortable and versatile option. These off-road vehicles, also known as utility vehicles or terrain vehicles, are designed to handle rugged terrains with ease. Here are some key features of side-by-sides:
UTVs come with four-wheel drive capabilities, providing enhanced traction and control on challenging terrains. Whether you're climbing steep hills or maneuvering through muddy areas, the four-wheel drive system will keep you moving forward.
In addition to these features, UTVs often have solid axles and flexible suspension systems that further contribute to their off-road prowess. So if you're looking for a reliable and capable vehicle for your next outdoor adventure, consider a side-by-side UTV for its impressive capabilities and versatility.
If you're looking for a motor vehicle that offers both off-road capabilities and on-road comfort, jeeps and SUVs are an excellent choice. These vehicles are designed to handle various terrains while providing a comfortable ride for everyday use. Jeeps and SUVs are versatile vehicles that can take you off the beaten path with ease.
One of the key features that make jeeps and SUVs great off-road vehicles is their four-wheel drive capability. This allows all four wheels to receive power from the engine, giving you better traction on rough terrain. Additionally, these vehicles often come equipped with specialized tires known as all-terrain tires or mud-terrain tires. These tires have deeper treads and stronger sidewalls, providing better grip on uneven surfaces.
Jeeps, in particular, have a long-standing reputation for their off-road capabilities. With their rugged design and short wheelbase, they can conquer challenging obstacles like rocks or steep inclines. SUVs, on the other hand, offer a more spacious interior and greater towing capacity compared to jeeps.
To experience the thrill of off-roading on sandy terrains, sand rails are your best choice for their exceptional maneuverability and powerful engines. Sand rails, also known as dune buggies, are specialized off-road vehicles designed to tackle the challenging conditions of sand dunes and other sandy terrains. These vehicles are equipped with long travel suspensions that allow them to navigate over uneven ground and absorb shocks from jumps and bumps.
Due to their lightweight construction and low center of gravity, sand rails offer excellent stability while maneuvering through tricky terrain. They have a wide track width, which further enhances their stability during turns and prevents tipping over.
In addition to recreational use, sand rails also find applications in racing events where they can reach impressive speeds across open deserts. Their versatility makes them popular choices for off-road enthusiasts looking to conquer sandy landscapes with ease. So buckle up and get ready to explore the exhilarating world of off-roading with a sand rail!
What are surprising uses for ATVs?
When it comes to navigating soft sand or soft ground, buggies excel due to their lightweight construction and powerful engines. The combination of torque and traction enables these vehicles to maintain control on unstable surfaces, making them ideal for dune driving or desert exploration.
One of the key advantages of buggies is their ability to be customized according to individual preferences. From roll cages and roof racks to LED light bars and upgraded suspension systems, there are numerous accessories available in the market that can improve both performance and aesthetics.
Rock crawlers, often considered military vehicles, are off-road vehicles specifically designed to tackle the most challenging terrains. They are equipped with long-travel suspensions that allow for maximum articulation and wheel travel. With their four-wheel drive systems, rock crawlers have the power to climb steep inclines, navigate slippery surfaces, and traverse uneven surfaces effortlessly.
One of the key components of a rock crawler is its ground clearance. This feature ensures that the vehicle can clear large rocks and other obstacles without getting stuck or damaged. Rear differentials in rock crawlers are often locked to provide equal power distribution to all wheels, maximizing traction.
To enhance control on tricky terrains, many rock crawlers come with crawl control systems. These advanced technologies enable drivers to maintain a steady pace over rocky surfaces by automatically adjusting throttle and brake inputs. With their torque converters optimized for low-speed crawling, rock crawlers offer exceptional torque output at lower RPMs, enabling them to crawl over obstacles smoothly.
Off-road motorcycles, often categorized as a distinct class of vehicles, are purpose-built for tackling challenging terrains that highway vehicles simply can't conquer. Unlike road tires found on typical vehicles, off-road motorcycles are equipped with knobby tires designed to provide optimal traction on dirt, mud, rocks, and more.
Motocross bikes, for instance, excel in high-speed racing on dirt tracks, while enduro and mountain bikes offer versatility for varying terrains. With their lightweight build, two-wheel drive configuration, and impressive suspension travel, these off-road machines can navigate diverse landscapes, offering riders an exhilarating off-road experience.
Monster trucks offer a thrilling off-road experience with their immense power and size. These off-road trucks excel in conquering rough terrains thanks to their high ground clearance and massive traction-enhancing tires. These trucks are typically equipped with four-wheel drive, these vehicles provide maximum control. Their substantial fuel tank capacity allows for extended adventures, but they can be on the pricier side due to their specialized design. Additionally, owning liability insurance is vital due to the potential risks and damages associated with their sheer size and power.
ATVs are one of the most popular types of off-road vehicles and are often customized in order to ensure an optimal riding experience. At Perfex Industries, we offer a comprehensive range of premium customization products designed to elevate your ATV experience.
Our product lineup includes everything from high-performance aftermarket parts and accessories to specialized body kits and innovative suspension upgrades. Whether you're looking to enhance your ATV's power, improve its off-road capabilities, or simply give it a unique and stylish appearance, we have you covered.
Four-wheel drive (4WD) vehicles provide power to all four wheels simultaneously, offering enhanced traction and control on challenging terrain. Two-wheel drive (2WD) vehicles transmit power to only two wheels, typically the rear, making them better suited for milder off-road conditions.
Regular maintenance is crucial for off-road vehicles. This includes checking fluids, cleaning air filters, inspecting brakes, lubricating moving parts, and ensuring tires are properly inflated. Always follow the manufacturer's maintenance schedule.
Off-roading can be fun but safety is paramount. Wear appropriate protective gear, including helmets, gloves, and goggles. Follow all local regulations and guidelines for off-road riding. Be cautious on unfamiliar terrain, and let someone know your planned route and expected return time.
Key Takeaways
It can be extremely frustrating when you are struggling to get your quad bike or ATV to start. However, it is usually due to a few common issues. Before you call a mechanic, let's look at some of the most common reasons ATVs don't start.
The battery is an essential component that powers the ATV and provides electrical energy to start the engine. When the battery is dead, it means there is not enough power to initiate the ignition process. To troubleshoot battery issues, first check if the battery terminals are clean and securely connected. Corroded or loose connections can prevent proper power transfer.
If everything looks fine, try jump-starting the ATV using another vehicle or a portable jump-starter pack. If jump-starting doesn't work, it may be time to replace the battery. Old or faulty batteries may not hold a charge anymore and need to be replaced with a new one of the correct size and specifications.
To diagnose a faulty ignition switch, check if the lights and accessories turn on when you turn the key. If they don't, it's likely that your ignition switch is the culprit behind your ATV not starting. Here are three signs of a faulty ignition switch:
A clogged fuel filter can hinder fuel flow to the engine, leading to starting issues, reduced power, and poor performance. To address this problem, begin by consulting your ATV's manual to locate the fuel filter. Inspect it for blockages or damage, and clean or replace it as needed. Additionally, check and clean other fuel system components like the air filter and fuel tank to ensure optimal performance. If your ATV has an aftermarket fuel pump, verify its pressure and mixture for potential issues. Maintaining a clean and unobstructed fuel system is essential for reliable ATV operation.
Forget mechanical issues, if your ATV isn't starting the first thing you should check is your fuel level. Even if you think you should have enough, check it first to see if your problem has a quick fix. When your ATV's gas tank doesn't have adequate fuel, it's a surefire recipe for a no-start situation.
An empty gas tank means there's simply not enough fuel to feed the engine through the fuel lines and intake. Fuel issues, especially insufficient fuel, can leave your ATV sputtering or not starting at all. To ensure a smooth start, always double-check your gas tank to ensure it has sufficient fuel for your adventure.
A damaged spark plug can be a significant factor causing your ATV to not start. It plays a pivotal role in generating a spark for ignition. If the spark plug is faulty, it may not produce an adequate spark in the spark plug hole. An insufficient spark can hinder the combustion process, leading to a no-start condition.
Ensuring that the spark plug is in good condition, with the right spark gap and a blue, solid spark when tested with a spark test tool, is crucial for reliable ignition, especially when using an electric starter. Replacing a wet or damaged spark plug and ensuring a spark plug boot is correctly installed can help restore adequate spark for ignition, allowing your ATV to start smoothly.
A faulty starter motor can be a frustrating reason why your ATV refuses to start. The starter motor plays a pivotal role in turning the engine over to initiate combustion. When you turn the ignition key or push the start button, it draws power from the battery, often through the negative battery terminal and cable, to spin the engine's crankshaft.
If the starter motor is malfunctioning, it won't effectively convert battery power into mechanical motion, leaving your ATV stuck in a non-start condition. In some cases, you may attempt to bypass this issue temporarily with starter fluid or manually engage the engine using a pull starter, but addressing the faulty starter motor is the long-term solution.
An ignition system malfunction can be a major culprit when your ATV won't start. Over extended periods of use, internal components like ignition coils, piston rings, spark plugs, and timing systems can wear out or develop issues. Ignition timing, which is critical for the combustion process, may become misaligned. This misalignment can lead to timing issues, resulting in poor engine performance or a no-start condition.
Conducting regular ignition system testing is essential for identifying and addressing these problems, particularly in modern fuel-injected ATVs. Ensuring that all components are in good condition and that the spark is delivered in line with the engine's needs will help your ATV start reliably every time.
Troubleshooting guide to ATV timing issues
Checking for a blocked air filter in your ATV is vital, as it can disrupt airflow and harm engine performance. A blocked air filter restricts oxygen intake, reducing power and efficiency, and leading to incomplete combustion and potential engine damage. Inadequate airflow also weakens spark generation for ignition and strains the fuel pump assembly. Using a fuel stabilizer can prevent air filter contamination.
To address this issue, inspect and clean or replace the air filter as needed, ensuring proper airflow for efficient combustion and overall ATV performance. If unsure about your ATV's condition, use a compression test kit for accurate compression level assessment.
A malfunctioning carburetor can cause rough engine operation and reduced power in your ATV. This critical component manages the fuel and air mixture needed for combustion. Problems with a faulty carburetor include restricted gas flow, often caused by a clogged or malfunctioning fuel valve, leading to poor engine performance. Another issue is a blocked pilot jet, resulting in an overly lean fuel mixture and poor idling.
Conversely, carburetor issues can also lead to a richer fuel mixture, caused by problems with the needle valve or float level adjustment, resulting in decreased power and potential spark plug fouling. To troubleshoot, check the fuel supply, inspect the air intake for obstructions, and test spark plug wires. Neglecting carburetor issues can lead to severe consequences, so address them promptly, and consult a professional if necessary.
When dealing with wiring issues in your ATV, it's crucial to inspect for loose connections or damaged wires that can disrupt electrical flow and affect your vehicle's functionality. Begin by examining the protective casing for visible damage, like frayed wires or disconnected connectors, and ensure all connections are securely fastened. Additionally, assess the battery's condition, as a weak or dead battery can contribute to wiring problems.
Check for corrosion on the battery terminals and confirm proper polarity. Use a multimeter to test the battery voltage, aiming for a reading between 12-14 volts to indicate a healthy battery. If you suspect a faulty connection, you can temporarily bypass it using jumper cables to diagnose specific wiring issues within your ATV's system.
ATV accessories for your model type
If you are an outdoor enthusiast looking to get the most from your ATV, look no further than Perfex Industries. We offer a wide range of high-quality products designed to enhance and customize your ATV experience. Our product lineup includes aftermarket parts and accessories such as lift kits, skid plates, and more. Whether you're looking to improve your ATV's off-road capabilities, enhance its aesthetics, or optimize its performance, we provide innovative solutions to meet your customization needs.
When bought new, ATV/UTV price ranges anywhere from $3,000 to $15,000 dollars. Since 4-wheel-drive vehicles are so popular, the price reflects the demand as well as the technology and features present in the vehicle.
Another key factor that influences the price is the ATVs model. Some brands are more popular so they cost more. All these factors influence the final price of both new and used ATVs and UTVs so it is essential to understand the basics of ATVs before entering into price negotiations.
Improve your ATV with accessories
When it comes to selling your used ATV or UTV, the best time to sell is usually when the weather is nice and market demand is high. This typically happens during the spring and summer months when people are looking for outdoor recreational vehicles to take advantage of warmer temperatures and longer days.
However, there may be some exceptions depending on where you live and the local market. For example, if you live in an area with a lot of farmland or in a particularly snowy climate, you might notice the demand for ATVs and UTVs skyrocket during the winter months when people need vehicles to work or to traverse through snowy terrain. By timing your listing, you can gain increased interest compared to if you listed it at a random time of the year.
Although summer is widely considered the peak season for selling all-terrain vehicles, many people choose to veer away from summer selling and sell their motor vehicles outside of summertime. There are some particular benefits to adopting this approach, such as:
When it comes to selling your used vehicles, the following factors play a crucial role in determining the price you can get:
Many potential buyers have the habit of scrolling past a dirty piece of equipment because it doesn’t look appealing or well-maintained. If you’re looking to sell your ride, it’s important to consider cleaning it before showing it off. Giving your vehicle a deep clean is always recommended to list it for sale. Getting rid of mud, residue, and debris should be at the top of your priority list.
When preparing a machine for sale, it’s essential to understand which areas may be vulnerable or need maintenance or replacements. Common items that should be put through a regular inspection include oil levels, air up tires and air filters to ensure the machine is in perfect working condition. Failing to replace worn-out components such as these can be problematic for the safety of the person buying the ATV. You should also make sure that your vehicle meets all legal requirements, such as having functioning brake lights and an off-highway vehicle license plate.
To attract potential buyers in a competitive market, it's crucial to properly price your vehicle. When determining the price for your ATV or UTV, you should consider factors such as the condition, age, and mileage. Research similar models in your area to get a sense of the market value. We recommend finding vehicles similar to yours and identifying the lowest price and highest price they are selling for. This will help you choose a midway point to price your vehicle.
When you sell an ATV or UTV, it is important to have the title and registration documents ready in order to complete the sale. Depending on the province, there may be different specific registration laws that need to be followed for a successful exchange of titles. If you plan to sell your ATV or UTV for off-highway use, make sure you have the necessary documentation. If you have a private registration or have completed the online registration process, keep the online registration receipt handy.
When creating your listing, be sure to include clear and detailed information about the specific make and model of your vehicle. Start by using contextually relevant keywords in your title and description. This will increase the visibility of your listing in search results. Additionally, provide accurate and detailed information about the vehicle's condition, mileage, and any additional accessories or features it may have. You should also take good pictures of your vehicle to appeal to as many buyers as possible. Remember to be transparent in order to build trust with potential buyers and don't forget to include contact information and respond promptly.
When selling your all-terrain vehicle, it can be easy to fall into motor vehicle scams. Some people can promise to transfer you the money but the money never comes through. That is why we always recommend meeting up with a potential buyer in person, so you can be sure they are legitimate. Once you agree on a price, simply retrieve your cash from the buyer and you have completed a successful sale. Selling your vehicle for cash ensures you are protecting your own assets and are not scammed.
Custom ATVs yield more return when they are sold and also ensure that you have the perfect riding experience on every type of terrain you tackle. Perfex Industries has been in the ATV business for over 10 years, working alongside dedicated rivers in order to bring you the highest quality ATV accessories. From skid plates to lift kits, we have everything you need to create an ATV that is ideal for you.
To make the selection process easier for you, we have compiled a list of the most popular ATVs and UTVs for farm work. Whether you need a reliable vehicle for hauling, towing, or navigating challenging landscapes, this guide will help you make an informed decision and ensure that your farm operations run smoothly.
Farmers use ATVs or UTVs because they provide efficient transportation and versatility for various farm tasks. These vehicles are equipped with powerful engines that enable them to tackle the rugged terrain found on farms. The four-wheel drive system ensures optimal traction, allowing you to navigate through muddy fields or rocky paths without getting stuck.
The carrying capacity of these vehicles is another reason why ATVs/UTVs are the vehicle of choice for farmers. With their spacious beds or cargo racks, you can easily transport tools, equipment, and even livestock from one location to another. Additionally, some models offer towing capabilities, which allow you to haul trailers or other heavy loads around the farm.
When it comes to power, ATVs and UTVs have what it takes to get the job done. Their engines deliver ample horsepower and torque, enabling you to perform demanding tasks such as plowing snow or tilling the soil with ease. Moreover, these vehicles come equipped with a range of features designed specifically for farm work. From winches and hydraulic lifts to sprayers and seed spreaders, there are numerous attachments available that can enhance your productivity.
Comfort is also an important consideration for farmers who spend long hours working on their land. Many ATVs and UTVs feature ergonomic designs with adjustable seats and suspension systems that absorb shocks for a smoother ride. Finally, when it comes to price, these vehicles offer a wide range of options suitable for different budgets.
What are surprising uses for ATVs?
ATVs have become an essential tool for farmers, allowing them to navigate their land efficiently and carry out various tasks. However, not all ATVs are created equal, and choosing the wrong one can lead to inefficiencies and potential problems down the line. Below, we explore the top options available to guide you toward making a smart investment.
The John Deere Gator is a great option when it comes to farming four-wheelers. It not only has immense cargo and towing capacity, but it also offers a lot of different features that make it ideal for those hard-working days. One of the versions available is the electric side-by-side with on-board charging, which makes it both powerful and quiet. This model of Gator also provides a wide variety of seating options in addition to optional extras like navigation.
All of this makes the John Deere Gator one of the most popular choices when shopping around for quality farm equipment from a leading brand. With its top-notch performance and durability, you can be sure that this will never let you down on your laborious days between the fields and barns.
The Kawasaki Mule Pro is the go-to workhorse for farmers and ranch hands alike. It’s the perfect vehicle for traversing through tight spaces on farms and ranches while having ample power for hauling loads, towing cargo, and utilizing its rear cargo space to store supplies and payloads. The Mule comes in both a compact size as well as a full-sized model, making it an ideal choice depending on the number of passengers needed. Whether select models are equipped with two or four-wheel drive capabilities, farmers can be sure that their vehicle will manage any terrain thrown in its path.
The Can-Am Defender PRO DPS is built to ensure success on even the toughest tasks, providing users with exceptional power and durability. It boasts a comfortable three-person seating capacity, making it suitable for teams in need of a multipurpose vehicle. The large cargo box can hold up to 1,000 lbs of equipment, making it one of the most versatile UTVs on the market. All this power comes from its liquid-cooled, V-twin engine which produces an impressive 82 hp and 69 lb-ft torque.
Yamaha is a well-known and respected brand of motor vehicles. The Yamaha Viking produces a smooth ride as it automatically selects the highest gear ratio for optimal torque performance in any situation. The engine produces enough power for all jobs such as hauling logs, fertilizer, or even attaching attachments, such as mowers, spreaders, or sprayers with ease. The frame gives drivers confidence by providing plenty of vehicle stability and ground clearance; making it easy to traverse up and over rough terrain without getting stuck or hung up on uneven terrain. This combination of features makes it one of the most efficient farming tools available today with excellent fuel economy, durability, and performance longevity.
The Polaris Ranger has become an essential part of agricultural businesses around the world. Whether you need to carry supplies such as hay bales, fencing, and wood, or make sure your crops are properly watered, it’s a powerful tool. The Ranger provides farmers and ranchers with all-wheel drive for maximum traction on rugged terrain and plenty of cargo space for whatever needs to be hauled. It can tow up to 2,000 lbs, meaning heavier objects like pallets of feed can be transported easily and quickly.
Determining a good price range for a high-performance farming vehicle depends on various factors such as the specific needs and requirements of the farmer, the type of farming operations, and the desired features and capabilities of the vehicle. Generally, high-performance farming vehicles can range in price from a few thousand dollars for smaller, more basic models, to tens or even hundreds of thousands of dollars for larger, more advanced machines.
It is essential to consider the long-term value and productivity that a high-performance farming vehicle can bring to the farm, balancing it with the affordability and return on investment. Researching and comparing prices from different manufacturers, considering financing options, and consulting with industry experts can help determine a good price range that aligns with the farmer's budget and farming objectives.
When looking for an engine, you don’t want to just settle for any engine that might fit the bill. You need to make sure it is able to handle what is expected of it and will last a long time. With regards to farming, you need an engine that can handle strain over longer distances and with heavier payloads than recreational ATVs or UTVs.
If you are looking at single-cylinder engines, then make sure it is one of the best ones out there in terms of power output and reliability. The same goes for multi-cylinder engines; from diesel engines to turbocharged four-strokes, make sure the one you select is capable of handling all that will be asked of it and more. Quality materials should be used when making these types of engines so they can withstand wear and tear due to farming activities.
Cargo capacity is an important factor to consider when purchasing a UTV for your farm. Knowing how much weight your bed can accommodate will allow you to choose the best vehicle for the job. The larger the bed size, the more useful it will be in hauling things like gravel, manure, and other materials. Having a UTV with a cargo capacity of 1,000 lbs or higher is ideal, as it will ensure that the vehicle is capable of carrying most of what you need.
When comparing models, you should also check other features such as safety measures and engine size. Although cargo capacity is an important aspect of choosing the right UTV, there are many other considerations involved in finding the perfect vehicle for your needs. With all of this in mind, you should be able to make an informed decision when purchasing a UTV that fits your farm's requirements.
When choosing the right ATV or UTV for your farm, there are several factors you need to consider:
If you are a farmer looking to maximize the performance of your ATV, regardless of the model you buy, you will need to customize it in order to ensure it is capable of completing all the tasks you need it to complete. At Perfex Industries, we have everything you need to customize your ATV. From advanced suspension lift kits to wheel spacers for additional clearance, our high-quality accessories ensure you can complete your heavy workloads with no hassle.
]]>
However, it's crucial to be aware of the potential depreciation that comes with owning one. Understanding ATV depreciation is essential for anyone considering buying or selling an ATV. It can affect your finances in the long run and impact the overall value of your vehicle. In this article, we will explain important things you need to know about ATV depreciation.
ATVs tend to experience significant initial depreciation in the first few years after purchase, with estimates ranging from 15% to 20% or more per year during this initial period. Subsequently, the rate of depreciation may slow down, and ATVs might lose around 5% to 10% of their value annually. Keep in mind that these figures are approximate and can differ based on the specific circumstances of each ATV and the broader market trends.
In addition to knowing when an ATV begins to depreciate, it's also important to understand how certain brands affect the depreciation life of an ATV. Generally speaking, vehicles from reputable brands often lose less value over time because parts are more easily available and repairs are more affordable compared to older models or unknown tandems. Knowing which brand offers better quality and reliability is key when considering the depreciation curve for different ATVs so that you can choose one that will retain its value best over time.
How many miles will a UTV last?
Several factors can influence the depreciation of an All-Terrain Vehicle:
All these factors interact to determine how quickly an ATV's value depreciates over time. It's important to consider these aspects when purchasing, using, and eventually selling an ATV to make informed decisions about your investment.
ATVs come with a hefty price tag; on average costing between $6,000 to $10,000 for a brand-new ATV due to the relatively expensive parts used in their production. Though often used recreationally, ATVs are commonly employed for difficult tasks such as farming and working in hostile weather environments.
The extremely durable materials used in making these vehicles ensure that they can withstand extreme conditions without too much deterioration over time. Furthermore, since these vehicles are integral to many professions, people are willing to pay the price.
To maximize your ATV's resale value, it's important to properly maintain and service the vehicle. Here are three essential tips to help you get the most out of your utility vehicle:
Keeping up with routine maintenance tasks is crucial for preserving the value of your ATV. This includes oil changes, brake inspections, and tire rotations. Additionally, don't forget about smaller components like the air filter, which should be cleaned or replaced regularly to ensure optimal performance. When using your vehicle for recreational purposes, there is a high chance that it will encounter maintenance issues so it is your responsibility to fix issues to limit the depreciation value.
When purchasing a brand-new vehicle, consider its purchase price range and make and model. The type of ATV you initially buy will influence the rate at which it will depreciate. Researching online can give you an idea of what similar models are selling for in the used market. Opting for a popular brand or model with a slower depreciation rate can potentially save you money in the long run when it comes time to sell.
Upgrading your ATV with peripheral equipment not only enhances its functionality but can also increase its resale value. Popular additions include winches, cargo racks, and protective covers. However, keep in mind that not all accessories retain their value equally well, so choose wisely.
When not in use, storing your ATV in a dry and secure location can protect it from environmental factors that may accelerate depreciation. Consider investing in a dedicated space or using a cover to shield it from dust, moisture, and UV rays.
Avoiding reckless behavior such as excessive speeding, aggressive cornering, or rough terrain riding can reduce the risk of accidents or damage that could negatively impact your ATV's value.
Keeping detailed records of all maintenance activities performed on your ATV can provide potential buyers with confidence about its history and condition. This documentation can include receipts for parts and services rendered.
Maximize your ATV resale value with vehicle accessories
When it comes to off-road vehicles like ATVs, the brand and model you choose can have a significant impact on their value over time. For example, let's take a look at the Can-Am Defender. This popular ATV brand is known for its durability and reliability. The Can-Am Defender holds its value well due to its high-quality construction and technological equipment. With proper maintenance, these ATVs can retain their value for longer periods. On the other hand, some lesser-known brands or models may not hold their value as well. These ATVs may lack advanced features or reliable components, leading to faster depreciation rates.
If you want to ensure your ATV remains in perfect condition in order to minimize its depreciation value and maximize its resale value, investing in quality ATV accessories is essential. At Perfex Industries, we understand how customizing your ATV can completely transform and elevate your riding experience, which is why we are committed to providing you with the highest-quality ATV accessories. From lift kits to skid plates, we have everything you need to enjoy an unparalleled riding experience.
]]>If you're in the market for a new ATV or UTV and want to make an eco-friendly choice, it's essential to consider the fuel efficiency of the vehicle. In this article, we share some of the most fuel-efficient ATVs and UTVs currently available to help you make an informed decision for your off-road adventures.
Fuel efficiency refers to how efficiently a vehicle uses fuel to operate. When it comes to fuel-efficient all-terrain vehicles and utility task vehicles, there are several factors to consider, such as fuel economy, fuel consumption, gas mileage, and engine size. These factors directly affect the fuel efficiency of the vehicle and can have an impact on your overall fuel cost and range.
Choosing a fuel-efficient ATV or UTV can save you money in the long run. Vehicles with good fuel economy and low fuel consumption will allow you to go further on a single tank of gas, reducing the need for frequent refueling. Additionally, a larger fuel tank size means you can carry more fuel, increasing your overall range. This is especially important if you plan on taking your ATV or UTV on long trips or off-road adventures.
When comparing fuel-efficient ATVs and UTVs, it's also important to consider the vehicle's fuel mileage or miles per gallon (mpg). A higher mpg means the vehicle can travel more miles on a set amount of fuel, providing better fuel efficiency. By understanding and considering these factors, you can make an informed decision and choose a fuel-efficient ATV or UTV that suits your needs and helps you save on fuel costs.
Finding a fuel-efficient ATV can be a game-changer for outdoor enthusiasts. Not only does it allow you to spend more time adventuring and less time worrying about an increase in fuel consumption, but it also helps reduce your carbon footprint. Below are fuel-efficient ATVs that offer a perfect balance of performance, durability, and fuel economy.
What's the best suspension for my Polaris ATV?
To get the most out of your ATV or UTV's fuel efficiency, you need to properly maintain the engine and regularly check tire pressure. Whether you are dealing with rough terrain on farms or are a smooth recreational driver, maintaining your motor vehicle is essential if you want it to be as efficient as possible. By following these simple steps, you can maximize fuel efficiency and save money on fuel consumption.
Proper tire inflation levels are an important part of maintaining a safe and efficient vehicle. Driving on under-inflated tires can greatly reduce your car's fuel efficiency due to the reduction in contact area with the road, increased rolling resistance, and extra strain on supporting components. This translates to wasted fuel and money if left unchecked.
The correct tire pressure for your car will depend on various factors such as driving conditions, speed, load, and age of your vehicle. Additionally, investing in a quality tire gauge or digital pressure monitor can help ensure accuracy when monitoring tire pressure levels. With proper care and maintenance of your tires, you can ensure your car remains safe and efficient for many years to come!
Reducing cargo and weight is one of the most important ways to increase fuel efficiency. The lighter a vehicle is, the less energy it takes to move it, resulting in less strain on its engine and a reduction in air drag. This means that any extra passengers or added cargo should be avoided if possible, as they can weigh down your car and decrease its fuel efficiency significantly. Additionally, body panels should have an aerodynamic profile to reduce resistance from the wind as you drive. Removing unneeded equipment may benefit fuel efficiency as well – since additional weight requires more energy to be moved around while driving.
Managing the brakes is an important part of getting good fuel efficiency from your UTV. The habit of overusing the brakes or “brake happy” as many drivers call it, is a problem that causes more stop-and-go motion than necessary. This can end up burning more fuel, and this can really have an effect on the performance of UTVs in particular. By eliminating this habit and instead starting to manage your braking, you'll be able to see a pleasing increase in your average MPG rating — oftentimes by 1-2 miles per gallon right away!
Aggression and speeding is a huge factor in ATV driving but can be managed with some techniques. To reduce aggressiveness and improve fuel efficiency, start by slowing down your acceleration and braking. Instead of reaching full throttle instantly, take the time to slowly grow your speed. This will give your engine more time to warm up and run efficiently while conserving fuel in the process. Additionally, careful use of brakes is important because excessive deceleration causes an abrupt drop in available horsepower and torque, which makes the engine work harder than necessary and decline in fuel economy as well.
Fuel additives play an important role in improving the efficiency and emissions of engines. They can be used to improve gasoline or diesel depending on the type of engine you own. Before adding a fuel additive, it is essential to read the product label carefully in order to determine whether it is compatible with your vehicle's aftermarket modifications or other types of fuel. It is equally important that you consult your owner’s manual, or contact the manufacturer if needed so that you are aware of any specific instructions that should be followed before use.
There are many factors that determine the appropriate fuel for your ATV. Most ATVs use regular 87-octane gasoline, but higher-octane fuels like 91 or 89 can improve engine performance. Some ATVs require premium fuel to avoid engine damage.
It is recommended that you check the manual to confirm your ATV's model and the best fuel grade to use. Another factor is whether your ATV is a 2-stroke engine or a 4-stroke engine. 2-stroke ATVs require a mixture of gasoline and oil, so it's best to use premium fuel with a compression rate of at least 91 octane.
If you are looking for a maximum-performance ATV, customizing your vehicle with ATV accessories is the way to go. At Perfex Industries, we recognize the importance of ATV customization which is why we offer a wide range of products from wheel spacers for oversized tires to lift kits for greater suspension. Whatever you need to improve your ride, we've got it.
Whether you're planning to navigate rocky trails, power through muddy paths, or explore challenging landscapes, a suspension lift kit can make a world of difference. By increasing the distance between your Yamaha ATV's frame and its axles, a lift kit provides room for larger tires, enhances overall stability, and ensures a smoother ride even in the most demanding environments. In this comprehensive guide, we walk you through the step-by-step process of installing a Yamaha ATV suspension lift kit.
Choosing the right lift kit for your Yamaha ATV involves considering several factors. Here are some steps to help you make an informed decision:
Before getting started, it's important to verify that your vehicle is ready for the upgrade. Make sure you've read and understood the lift kit installation instructions carefully before proceeding. Next, gather all of the hardware and tools needed for the installation process. The contents of your lift kit package may include lift brackets, bolts, washers, nuts, and other necessary components. Make sure that you have everything you need before starting to avoid interruptions during installation.
To remove the stock suspension components for your Yamaha ATV, it's important to ensure that all hardware and bolts are easily accessible. Use a socket wrench to loosen them up before proceeding with the removal process. Follow the step-by-step photo instructions provided by your lift kit manufacturer for precision engineering. Be careful when removing electrical connections or brake lines attached to these components and always use caution when handling heavy parts as they could cause injury if they fall. It may be helpful to have an extra set of hands during this process for additional safety.
Now that all the stock suspension components have been removed, it's time to get started on putting in your new lifted parts. Luckily, most Yamaha ATV suspension lift kits are designed for an easy-to-install bolt-on application, making it easier even for novice mechanics. Begin by installing the front lift components; these will consist of strut spacers or full replacement struts with longer travel. Next, move on to the rear lift, which can be accomplished using either blocks or full replacement shocks with additional length and travel.
Once you have installed the front and rear lift components, it's important to ensure that they are properly aligned. Check the ride height of your ATV against manufacturer specifications before moving on to shock mount installation. This will help you avoid any issues down the road when it comes time for alignment adjustments.
The next step in installing your Yamaha ATV suspension lift kit is mounting shocks and other necessary components such as wheel spacers. Shock mounts should be tightened securely to prevent any movement during use while wheel spacers should be installed according to manufacturer instructions. Finally, double-check all bolts and connections for tightness before test driving.
For those who need more detailed guidance during the installation process, step-by-step photo instructions are available online or through the lift kit manufacturer's website. Following these guidelines will ensure that your Yamaha ATV suspension lift kit is installed correctly and safely so that you can enjoy a whole new level of off-road performance!
Depending on the type of lift kit you've chosen, you may have a variety of options for adjusting the height. Most kits come with instructions and step-by-step photo instructions to help guide you through the process. The first step in adjusting the suspension height is to determine how much lift you want. Lift kits typically come in increments ranging from one inch to several inches, and your choice will depend on what kind of riding you plan to do. If you'll be doing mostly trail riding or light off-roading, a small lift may be sufficient.
However, if you plan on tackling rough terrain or making significant modifications to your ATV, a larger lift may be necessary. Once you've decided on the amount of lift that's right for your needs, it's time to make adjustments to the shock absorbers and other suspension components. This can involve adding spacers or adjusting preload settings on your shocks. It's important not to over-tighten or under-tighten any bolts during this process as this could cause damage or create an unstable ride.
To test your upgraded ride, take it for a spin on various terrains and feel the difference in how smoothly it handles bumps and turns. After installing a Yamaha ATV suspension lift kit, you should notice an immediate improvement in performance. The upgrade should provide more clearance for obstacles and increase the inches of ground clearance. This will allow you to tackle rugged conditions with ease.
When testing your upgraded ATV, pay attention to how well it handles turns and absorbs impacts from bumps or rough terrain. You want to make sure that the lift measures true, providing enough clearance without compromising stability or control. If you notice any issues with handling or stability after installing the suspension lift kit, you may need to adjust certain components or seek professional help.
Installing an ATV lift kit can be a complicated task, and the amount of time it takes to complete the job will depend highly on the complexity of the kit you choose for your Yamaha ATV. For more intricate suspension lift kits, installation could take up to 6 hours and involve tedious labor like drilling mounting holes, sealing mounting points, and bolting on components.
On the other hand, less complex models, such as body lifts or spring spacer lifts might only require 2-3 hours of work. The skills and experience of the individual working are also major factors in how long installation will take; a veteran worker with years of modifying ATVs may be able to finish in under an hour.
Keeping your lifted ride in top shape requires regular maintenance and care to ensure optimal performance on any terrain. One of the most important aspects of maintaining your new Yamaha ATV suspension lift kit is to check for any loose bolts or nuts regularly. This can prevent accidents or damage to the vehicle while riding.
It's also essential to keep shock springs clean and free of debris, as this can affect their functionality. Another critical aspect of maintaining your lifted ATV is checking tire clearance frequently. With the installation of a lift kit, you may need to adjust the tire size accordingly. Make sure that there's enough space between the tires and bodywork, as well as between the tires themselves, so they don't rub against each other during rough rides.
Customizing your ATV is an essential part of the ATV riding experience. At Perfex Industries, we have been in the ATV accessory game since 2012, and we manufacture only the highest-quality ATV accessories. From lift kits to wheel spacers to skid plates, we have everything you could possibly need for a wide variety of ATV brands.
]]>In this comprehensive guide, we walk you through the process of installing a suspension lift kit specifically designed for Kawasaki ATVs. Whether you're looking to conquer rocky landscapes, tackle muddy trails, or simply want to enhance your ATV's appearance, this step-by-step tutorial provides you with the knowledge and confidence to tackle the installation.
When it comes to choosing a Kawasaki ATV suspension lift kit, there are several factors to consider.
Ultimately, choosing the right suspension lift kit for your Kawasaki ATV depends on your specific requirements and budget constraints. It's essential to do thorough research before making any purchase decision so that you can select a reliable product that meets all of your needs while ensuring optimal performance on the trails!
Find the perfect lift kit online
Lift kit installation is actually a fairly simple process, but it requires dedication and a certain level of expertise. If you are looking to install new lift plates, keep reading.
In addition to the lift kit, you'll need some basic tools such as wrenches, sockets, pliers, and screwdrivers. Depending on the specific kit you choose, there may be additional tools required such as a torque wrench or spring compressor. Double-check the instructions provided with your lift kit to ensure you have everything necessary for successful installation.
It's also important to consider any additional supplies you may need before getting started. For example, if you plan on installing larger tires along with your new suspension lift, make sure to purchase them ahead of time so they're ready for installation once the lift is complete. Other items such as zinc-coated bolts or heavy-duty brake lines may also be necessary depending on your specific ATV model and lift kit.
The front end of your vehicle is where the installation process begins. Start by lifting the front of the quad and taking off the wheels. Remove the brake fluid line attachment from the upper suspension arm and take out the lower shock bolt. Then, install the two bearing plates with the spacer sleeve in the original shock position. Proceed with installing the lower part of the damper. Finally, secure the brake fluid line with a cable tie. All that's left is to put the wheel back on.
Now, we move on to the rear lift installation. Lift the rear of the quad and remove the wheels. Remove the stabilizer bar's connecting rods, they won't be reused. Remove the upper fixing bolts of the rear shocks and install the bearing plates with spacer sleeves, ensuring they are correctly positioned in the plate's notches. Attach the shock absorber to the plates. Finally, install the lift kit's connecting rods to the stabilizer bar, it will require effort due to the angle caused by the lift kit. Put the wheels back on the quad. You should always follow the instruction manual provided with your kit, and if you do not feel confident changing it yourself, seek assistance from a professional.
Now that everything's securely installed, it's time to fine-tune your new suspension system by adjusting the settings to match your riding preferences. Keep in mind that different lift kits may require different adjustment procedures. For a lift kit with shock springs, you'll need to adjust the spring preload to set the ride height and stiffness of your ATV's suspension. On the other hand, if you've installed a lift spacer kit, you'll likely only need to adjust your factory shocks.
Regardless of which type of lift kit you have installed, you must ensure that there is enough clearance between the tires and fenders. You don't want any rubbing or scraping while driving! Additionally, keep in mind that adjusting your suspension settings can impact how your ATV handles on different terrains. For example, raising the ride height will increase ground clearance and make it easier for you to tackle rough trails and obstacles. However, this may also lead to a higher center of gravity and reduce stability on flat surfaces such as roads.
As a lift kit owner, testing your ATV's new suspension is crucial to ensure that it is functioning properly. Whether you've installed a signature lift kit, an ultimate lift, or a spring spacer lift, it's important to take your ATV out for some test runs before hitting deep terrain.
When testing your new suspension system, keep in mind that it may take some time to get used to its performance. If you're upgrading from a stock shock system, you'll immediately notice a difference in your ATV. Take some time to adjust to the changes and gradually increase the speed and difficulty of the terrain as you become more comfortable with the modification.
Before taking on any challenging terrain, make sure that your tires are compatible with the stated tire fitment guide provided by the manufacturer. If you plan on using fat tires or riding through deep mud or snow, check if they're suitable for such conditions. Testing in various terrains will give you an idea of how well your new suspension can handle different situations.
In addition to testing out the handling capabilities of your new lift kit, pay close attention to any unusual noises or vibrations during use. This could indicate improper installation or damage during shipping times. Don't hesitate to contact customer service if there are any issues with product quality or installation instructions.
Everything you should know about buying an ATV lift kit
To keep your ride running smoothly, you'll want to take good care of your new suspension system. After you've successfully installed your lift kit, it's important to follow up with proper maintenance and care:
ATV riders know that the riding experience is just as much about the personalization of their vehicle as it is about driving. It is essential that you modify your vehicle in order to ensure that it suits you perfectly. From ride comfort to aesthetics, there are a multitude of ways that you can customize your ATV, and we at Perfex Industries want to help you do just that. Established over 10 years ago, we are dedicated to providing you with the highest quality ATV accessories. We sell a wide range of products, from lift kits to wheel spacers to skid plates!
]]>In this article, we guide you through the steps necessary to install a Suzuki ATV suspension lift kit. We cover everything from choosing the right kit for your needs to adjusting the new components and fine-tuning your ride. By following these instructions carefully, you can give your ATV the boost it needs to tackle any challenge on the trails.
A suspension lift kit is a modification that raises the height of your vehicle's frame, allowing you to install larger tires and increase ground clearance. This results in improved performance on rough terrain by providing more space between the wheels and obstacles on the trail.
Before purchasing a Suzuki suspension lift kit, it's important to understand how it works. The shock absorbers play a crucial role in absorbing the impact from bumps, rocks, and other obstacles on the trail. A larger lift kit will require longer shocks with higher travel capacity to accommodate the extra height.
It's also essential to choose a kit that aligns with your riding style and environment. Once you've selected a Suzuki ATV suspension lift kit that meets your needs, the most important thing you need to consider is how many inches of lift you need for your particular ride style.
Buying a UTV lift kit: Everything you should know
Before you purchase a lift kit for your Suzuki ATV, you first need to consider which is the right lift kit for you. Below are key factors to consider before choosing a suspension lift kit for your Suzuki ATV:
You'll need a variety of tools and materials to successfully modify your ATV's suspension system for a Suzuki ATV suspension lift kit. The necessary tools include socket wrenches, pliers, torque wrenches, screwdrivers, pry bars, and drills. You may also need an impact wrench if you have stubborn bolts that won't come off easily.
In addition, you will need some basic materials such as jack stands or ramps to elevate the vehicle for easy access. The Suzuki ATV suspension lift kit installation process is relatively easy if you have the right tools and follow the instructions provided in the kit. The rear suspension lift kit usually comes with everything you need to raise your vehicle's height by up to 2-3 inches including shock mounts, coil spring compressor, and other necessary hardware.
Before beginning the installation of your Suzuki ATV suspension lift kit, it's crucial to take proper safety precautions. The modification process can be dangerous and could lead to accidents or injuries if not done carefully. You should wear appropriate safety gear such as gloves, eye protection, and closed-toe shoes throughout the installation process.
You should also take time to read the instruction manual thoroughly before beginning any work. Additionally, make sure you have all the necessary tools on hand and that they're in good condition. If you have any doubts about your ability to complete the job safely or correctly, seek professional assistance.
Make sure that you have assistance when lifting large components and that all equipment is properly secured before beginning work. Keep children and pets away from the work area during installation. Remember that different lift heights may require different levels of expertise when it comes to installation.
Now it's time to prepare your ride for the next step in upgrading its performance. Firstly, check if you have all the necessary tools and equipment for installing a suspension lift kit on your Suzuki ATV. You'll need a jack stand or hydraulic lift, socket wrenches, pliers, wire cutters, and a torque wrench. Ensure all of these items are within arm's reach before starting.
Next, remove the wheels from your ATV and install wheel spacers if required. Wheel spacers provide additional clearance between the tire and suspension components, which can be particularly helpful when lifting an ATV's suspension system. This will help avoid rubbing or interference issues when turning the wheels at high speeds.
After installing wheel spacers, inspect your ATV's shocks, springs, axles, and tires to ensure they are in good condition. Replace any damaged or worn-out parts before proceeding with the installation of a new suspension lift kit as this could compromise safety. It's also essential to verify that all bolts on the ATV frame are tight as loose bolts may cause alignment problems down the road.
You also need to measure your ground clearance before installation of the new suspension system so that you can compare it after installation is complete. This will give you an idea of how much higher your vehicle has been raised by the new shock absorbers and springs installed during prepping for the installation of the Suzuki ATV suspension lift kit.
Once you've prepped your ride, it's time to start putting in the new components of the lift system. Make sure you have all the necessary parts for your specific Suzuki ATV suspension lift kit before starting the installation process. Begin by installing the rear lift brackets. This involves removing the factory shocks and springs, which will be replaced with longer ones included in the kit.
Once removed, attach the new rear lift brackets to each side of your ATV frame using the bolts and nuts provided in your kit. Next, install the shock body and shock eyelet into their respective positions on both sides of your ATV's rear axle. Tighten all bolts securely but avoid over-tightening as this could cause damage to your suspension system. If you plan on upgrading to larger mud tires or aftermarket wheels, consider adding leaf spring upgrades to further enhance your ATV's performance.
Fine-tuning your ride's suspension is essential to ensure a smooth and safe off-road experience, so don't overlook the importance of adjusting it properly. After installing a Suzuki ATV suspension lift kit, you'll need to adjust the suspension system to optimize your ride quality and ground clearance.
Once everything is inspected, locate the shock absorbers at each wheel assembly and adjust their preload settings by turning them clockwise or counterclockwise until they suit your desired ride height. Next, it's time to fine-tune your shocks' rebound settings. This adjustment controls how quickly the suspension rebounds after absorbing bumps on rough terrain.
Start by setting all four shocks to their factory rebound settings before making adjustments based on how stiff or soft you want your ride quality to be. If you're using factory wheels, adjustments might not be necessary since they're designed for moderate off-road conditions.
ATV riders take pride in altering their ATVs in order to ensure they provide the exact riding experience they're looking for, and at Perfex Industries we are here to help you create your perfect ATV. We are manufacturers of accessories and equipment for ATVs and UTVs and take pride in offering the highest quality equipment. Whether you're looking for wheel spacers, suspensions or skid plates, we've got it all!
]]>In this article, we guide you through the process of installing a Honda ATV suspension lift kit. We cover everything from choosing the right kit for your vehicle to testing out your new suspension system. By following these simple steps, you'll be able to install a lift kit on your Honda ATV in no time.
If you want to take your Honda ATV to the next level, a suspension lift kit is the perfect solution. A suspension lift kit is an aftermarket modification that raises the ride height of your vehicle, giving it more ground clearance and allowing for larger tires. This upgrade can make your Honda ATV look more aggressive and intimidating while also improving its off-road capabilities. Below are benefits of a suspension lift kit for your Honda ATV.
One of the main advantages of installing a suspension lift kit on your Honda ATV is increased ground clearance. With a few extra inches of lift between the ground and your vehicle's undercarriage, you'll be able to tackle rougher terrain without worrying about scraping or damaging vital components like shock mounts, A-arms, steering mechanisms, ball joints, or brake lines. This added protection can give you peace of mind in even the most challenging environments.
A higher vehicle body allows for bigger tires. ATV riders generally want bigger tires for added durability. Moreover, bigger tires can handle more intense terrain, making courses more thrilling and easier to navigate. They can also handle a wider range of weather conditions, so you don't have to restrict riding to the warm months, but can also tackle snowy terrain.
Bigger wheels and elevations enhance the appearance of an ATV. ATV enthusiasts value impressive vehicles, which you can easily achieve with an ATV lift kit. Customizing your ATV with modifications, including a lift, allows you to ride in style and feel confident in your vehicle.
When choosing the right body lift kit for your Honda ATV, there are several factors to consider. Here's a step-by-step guide to help you make an informed decision:
By following these steps, you should be able to choose the right lift kit for your Honda ATV model. Remember to prioritize safety, compatibility, and quality when making your decision.
Before starting the installation of your new suspension lift kit, make sure that you have enough space to work on your quad and park it in a flat area. Ensure that you have all the necessary tools and equipment, including a jack stand, wrenches, pliers, and sockets.
The next step is to inspect your vehicle thoroughly. Check the tires' condition and ensure that they're compatible with the lift kit's height. Look for any damage or wear on the joints, bearings, or other parts of the suspension system that may affect its performance after lifting. Additionally, check if there are any loose or damaged brake lines that can cause safety hazards.
Once you have inspected your ATV thoroughly, remove any accessories or parts from under the vehicle which may interfere with installing the lift kit. Clear away dirt and debris from around the suspension components before beginning work so as not to contaminate anything during installation. Keep all nuts and bolts together in labeled containers to avoid losing them during disassembly.
Read through all instructions carefully before proceeding with the installation process. Follow each step precisely to ensure proper fitment and adjustability of your new suspension setup. Take breaks when needed to avoid fatigue since this process may take some time depending on experience level and overall skill set in working on vehicles.
First, you'll need to take off the factory shocks, springs, and other components from your quad's suspension system. You should start by jacking up your Honda ATV and removing the wheels. This will give you better access to the suspension parts that need to be removed.
Next, use a socket wrench or an impact gun to remove the factory shock bolts from both the front and rear shocks of your vehicle. Once you have removed all four factory shocks, it's time to remove the shock absorber. This part is usually located in the center of the frame and connects both front and rear suspensions together.
To remove it, you will need to loosen up any clamps or brackets holding it in place with a screwdriver or pliers. After removing all these parts, inspect them carefully for any damage or wear and tear. If there are any issues found with these parts, they should be replaced before installing new ones. Once everything has been inspected thoroughly, you can proceed with installing your new Honda ATV Suspension Lift Kit.
Now that the factory suspension components have been removed and inspected, it's time to move on to installing the upgraded components. You should always start with front-end installation. install the longest lift bracket (called the 'front long bracket') between the shocks.
Then, put the front spacer on the shock mount frame and align the front long bracket with the front small bracket using an exact hex bolt and lock nut. You can find the exact hardware in your lift kit manual. Connect the top shock to the lift bracket using a hex bolt and lock nut, and add washers for the best performance. Finally, reattach your wheels and torque the lugs to factory specs. Congratulations, your front-end lift is complete!
Installing the back-end lift is almost the same as the front-end lift. However, there are a few differences to note. Before installation, unclamp the brake line and give yourself enough line length. Use the jack on the rear lift brackets on the bottom skid plate for a secure lift. After removing the shock bolts, jack up your ATV or UTV two inches higher. Ensure the hex bolts face inward when attaching the shock. Lastly, connect the lift bracket to the stock shock mount.
Once the upgraded components are securely in place, it's time to fine-tune your Honda's suspension by adjusting the height and alignment. This step is crucial as it determines how your ATV will perform on different terrains. Adjusting the suspension height will increase or decrease ground clearance, which affects the size of tires you can install and how easy it is to go over obstacles.
Once you've installed the lift kit, aligning your wheels properly is also important for safety and optimal performance. You can do this by measuring from one point on each wheel to another across the axle. Adjust each wheel until they are parallel to each other and perpendicular to the ground.
Incorrect alignment can cause uneven tire wear, poor steering control, and even accidents. Installing a suspension lift kit on your Honda ATV is only half of the job done. Adjusting its height and alignment ensures that you get the maximum performance out of it while maintaining safety standards.
To keep your lifted Honda ATVs suspension system performing at its best, you'll want to take good care of it by following these maintenance tips:
Sometimes things don't go as planned during installation, which is why troubleshooting common issues is important. One of the first things to consider when installing a Honda ATV suspension lift kit is which type of lift kit model you're using. There are several variations of lift kits available, including lift plates and spacer kits. Depending on which model you have, the installation process may differ slightly. Make sure you carefully read through the instructions provided with your specific kit before beginning installation.
Another issue that commonly arises during installation is shock mounting. If not done correctly, this can result in damage to your shocks or cause them to wear out faster than usual. It's important to follow the manufacturer's instructions carefully and ensure that all bolts are tightened securely.
Brake lines are also something that should be taken into consideration during installation. When lifting your ATV with a suspension lift kit, there is potential for brake line damage due to increased tension or stretching caused by the added height. To avoid this issue, it's recommended that you purchase extended brake lines designed specifically for lifted ATVs.
ATV lift kits are a great way to customize your vehicle to ensure maximum performance. At Perfex Industries, we understand the importance of customizing your ATV so that you can enjoy your rides as much as possible, which is why we manufacture only the best quality accessories for your ATV. From lift kits to wheel spacers and even skid plates, we have everything you need to transform your ATV into your dream vehicle.
]]>A UTV lift kit is an aftermarket accessory that is installed to increase the overall height of your off-road vehicle and make your ride smoother and safer. This type of modification can have a variety of benefits, depending on the kind of kit you install and what its purpose is. There are different types of lift kits available for UTVs, each with its own set of advantages and drawbacks.
For anyone considering making modifications to their UTV there are plenty of options when it comes to lifting solutions: from simple spacer-style leveling kits right through to full-blown portal gear lifts. Whether you want additional performance gains or just some added ground clearance, there is sure to be something suitable for you.
What you don't know about suspension on your ATV
If you’re an avid UTV user, investing in a lift kit is an excellent way to get the most out of your vehicle. Lift kits can provide you with increased power, improved handling, and a more comfortable ride while tackling extreme terrain. Here is a breakdown of the major benefits of installing a UTV lift kit.
Improving ground clearance for UTVs is an excellent way to keep your vehicle safe on off-road trails. With the addition of a UTV lift kit, the vehicle gains inches of clearance from the ground and provides a more comfortable ride over rugged terrain with bumps. Having better ground clearance helps prevent any damaging encounters between the undercarriage of your UTV and rocks or other obstacles which are commonly found off-road.
Installing a lift kit on your vehicle opens up possibilities of utilizing larger wheels and tires. Generally, the bigger the tires, the more traction and durability they provide, which is why riders might favor larger tire fitments. Installing bigger tires also provides better off-road performance. They make it easier to traverse rough terrain and obstacles like roots, rocks, or fallen tree limbs. Since ride quality can significantly differ between different sizes of tracks or treads, bigger tires are often preferred when it comes to tackling difficult terrains.
Lift kits are a popular way to get a better exterior look for UTVs. Many owners opt for lift kits specifically to increase the aesthetic appeal of their vehicles. Installing lift kits can give the UTV a more rugged appearance, with bigger and bolder tires helping set it apart from others. Whether that’s increasing the ground clearance or simply just changing the look of the vehicle, lift kits provide an attractive visual upgrade to any UTV.
When it comes to UTV lift kits, there are several types available for you to choose from. Whether you’re looking for monster tires or an extra inch of a suspension lift kit, understanding the type of lift is essential to find the right fitment for your vehicle.
A spring spacer lift is a great way to obtain a basic UTV lift without having to worry about any complicated hardware setup or installation. This entry-level lift includes four machined aluminum spacers that replace the stock shocks on your UTV. You will need a spring compressor tool to safely install the spacers, but after that, you are good to go with this basic but effective lift. The installation process for the spacer is incredibly simple and straightforward, all you have to do is remove the stock shocks and mount the spacers in their place!
This simple and affordable solution can provide additional ground clearance for added performance, comfort, and safety. Spring spacer lifts are perfect for those who want more ground clearance without going through the hassle of purchasing expensive lift kits or making other costly changes to their vehicle suspension setup. It might be basic compared to higher-end alternatives, but it's sure an easy way to get a few extra inches of desired lift!
Bracket lifts are one of the most popular and effective ways to lift a UTV. The variety of options available on the market makes it easy to customize your rig however you please. Beyond being an excellent choice for customizing your vehicle, bracket lifts move the shock mounting points for an upgraded suspension system. By shifting these points up, you get better ride quality, along with improved handling and stability at higher speeds. Not only does this type of lift help you improve your driving experience, but it can also provide some aesthetic improvements as well since it raises the overall height of your ride.
Portal gear lifts are a great way to add extra clearance and stability to just about any vehicle. They use an innovative box hub system, providing up to eight inches of additional lift. This can be beneficial for navigating tough terrain, as it increases ground clearance and improves traction. In addition, portal gear lifts reduce strain on shocks, axles, and other vital components due to the lower profile and lower center of gravity they provide.
When purchasing a UTV lift kit, there are some important features to consider. It can be tempting to approach your local UTV accessories store and go overboard with your lift kit. To prevent you from doing that, we have collated a list of the most important things to consider when buying a UTV lift kit:
When it comes to upgrading your lift kit, the cost is going to be an important factor in determining the final kit you choose. Investing in a basic bracket lift or average lift kit will usually only set you back between $200 to $800, making them ideal for those who want those extra inches of lift but don't want to break the bank. However, if you have a bigger budget, opting for a portal lift might be ideal for you as they give a superior lift and come in at around $3,000.
Personalizing your UTV with aftermarket accessories is an exciting process that allows you to express your individual style and personality. At Perfex Industries, we are dedicated to helping you create the UTV of your dreams, which is why we stock a wide range of high-quality UTV accessories, from lift kits and wheel spacers to skid plates.
]]>Foot pegs are an important part of any ATV rider's gear. They are attached to the frame of a motorcycle or ATV and designed to provide the rider with a place to rest their feet while riding. Foot pegs are typically made of metal or plastic and can be adjusted to accommodate different riders and riding styles.
They provide the support and protection needed for a safe ride and can be used to customize the look of your ATV. Foot pegs come in various shapes and sizes, from stock foot pegs to Nerf bars with aggressive teeth, tusk folding shift levers, or even billet race foot pegs. No matter which type you choose, it is important that they fit properly and offer adequate grip when riding. It is also important to choose foot pegs that won't interfere with shifting or other movements while riding your quad.
It is important to keep your feet on the foot pegs when riding an ATV or other terrain vehicle because they provide a secure and comfortable space for boots to grip onto so riders can maintain balance and control over their all-terrain vehicles. This is due to the fact that having one's feet positioned properly keeps the proper center of gravity when driving over difficult terrain.
Various types of foot pegs are available depending on the make and model of your ATV. Here are some of the most popular aftermarket options to consider:
No matter which option you choose, it pays to invest in quality products that will last through tough conditions and give you excellent performance on the trail. While there may be no one size fits all solution when it comes to selecting aftermarket foot pegs, careful consideration of your needs should lead you to make a confident decision about which product best suits your ride.
Just as there are many different types of aftermarket foot pegs that you can install on your ATV, there are also a variety of different brands to choose from:
Pivot pegs are a great choice for ATV riders looking to upgrade their ride. They offer a range of advantages over standard ATV foot pegs, and can be particularly beneficial for youth ATVs or those who have added custom parts such as padded seats or handlebar angle changes.
Pivot pegs provide extra support and cushioning, protecting your feet from the vibration and shock produced by an ATV’s engine while also providing better traction due to raised edges on the peg surface. This makes them especially useful when riding off-road in rough terrain, where boot wear is more likely to occur.
Many pivot pegs come with bolt-on assembly kits that make installation easy, even if you don't have any experience working on ATVs. The bolts used usually require no additional modifications to be made before using the product. So, if you are looking for a simple set of utility ATV foot pegs, you should consider investing in pivot pegs.
The eccentric handlebar mounts provided with many brands of pivot pegs ensure they stay secure during rides, plus most models feature an engine shut-off switch which will prevent accidents if the rider falls off mid-ride. These features make pivot pegs ideal for anyone wanting to customize their ATV setup without sacrificing safety or comfort. Plus, since these products typically use simple bolt screws rather than complex tools, they're relatively inexpensive and quick to install!
When it comes to choosing the best foot pegs for your ATV, plastic, and metal are both viable options. While product details and vehicle type may influence your decision, considering the riding position and passenger seats you intend to use is also important. Plastic pegs tend to be more affordable, making them a great choice if you’re on a tight budget.
On the other hand, metal pegs offer greater durability for aggressive riders who wear ankle boots or closed-loop design footwear. These models feature stronger materials that hold up well against impacts from hard landings and off-road terrain. Plus, many of these come equipped with specialized features like adjustable pins or rubber grips designed to make sure foot placement doesn't change during demanding rides.
Whether you opt for plastic or metal depends on what kind of riding experience you want. Be sure to take into account all the design features offered by different brands before settling on one peg style over another so that you get exactly what works best for you.
Customizing your ATV is essential if you want a vehicle that you are 100% comfortable riding. Taking the time to understand your riding style and the experience you want will help inform the types of aftermarket adjustments you should make to your ATV. Whatever you decide, Perfex Canada is here to help. From lift kits and wheel spacers to skid plates, we stock only high-quality products that will elevate your riding experience.
]]>An ATV suspension is an essential feature to have on your off-roading vehicle. It helps ensure a smooth ride as well as reduce body roll for smoother cornering. Shock absorbers are engineered to absorb impact from uneven surfaces, providing a comfortable and safe experience while out on the trails.
Furthermore, compression damping helps reduce low-speed impacts from bumps and rocks, giving you superior handling in more challenging trail conditions. With the combination of shock absorbers and compression damping, riders can push their ATVs beyond traditional boundaries while maintaining control and precision.
Pros and cons of an ATV lift kit
When it comes to selecting the best suspension for your Kawasaki ATV, there are many options available. The type of suspension you choose will ultimately depend on the type of ride you want to enjoy. Below is a breakdown of some of the most popular types of ATV suspensions on the market at the moment.
Long-travel suspensions are the cutting edge of ATV technology. They provide more inches of travel than stock damping rod-type suspensions and offer improved bracket lift capabilities, often providing several inches of lift. Long-travel suspension systems also offer weight savings over their traditional counterparts while still providing ultimate comfort on rough terrain.
When opting for a long-travel suspension system, you benefit from features like sensitive damping which ensures that your wheels remain firmly planted on the ground. In addition, many long-travel suspension kits come with hydraulic preload adjuster upgrades that make it easier to fine-tune your ride quality depending on conditions.
Short-travel suspensions offer several advantages for ATV riders that long-travel suspensions don’t. Ride height can be drastically improved with a short-travel suspension, resulting in better ground clearance and maneuverability. Additionally, this type of suspension helps keep the steering wheel at a comfortable angle while providing stability on rough terrain.
Another benefit often overlooked is aesthetics. Many ATVs come standard with painted aluminum wheels that look great with a short-travel suspension’s low profile stance. Plus, with its lighter wet weight compared to longer suspension setups, you get improved acceleration and handling performance, perfect when riding off-road or on tight trails!
An independent suspension offers a variety of advantages for those seeking the best performance from their Kawasaki ATV. With an independent suspension, engine braking is smoother and more consistent, allowing you to take advantage of its twin engines' power band.
Plus, by keeping all four wheels in full ground contact at all times, it helps maintain stability on uneven surfaces while providing superior passenger comfort. In addition to increased stability and better engine braking, an independent suspension can be adjusted with either soft or firm settings depending on your needs. This allows you to customize the rear brake levers and cargo racks for maximum efficiency when riding over rough terrain.
A solid axle suspension is a great option for many Kawasaki ATVs, including the Kawasaki Teryx KRX. This type of suspension provides riders with enhanced stability when navigating rough terrain and helps ensure that the vehicle can carry heavy loads such as those found on rear racks. Additionally, this type of suspension helps protect the automotive paint from damage due to vibrations caused by uneven terrain.
Kawasaki's Lakota model features a solid axle suspension system which has been developed in partnership with Dixon Kawasaki Racing Team. The team has tested the system extensively and has determined it offers superior performance compared to other types of suspensions available for ATV vehicles. Furthermore, this setup allows drivers to customize their ride depending on their specific needs, whether they're looking for increased stability or more speed.
Upgrading your ATV suspension is a great way to improve the performance and overall ride of your vehicle. Through improved shock mount, damping rod type forks, rear suspension components, and hi-performance springs, you can make sure that your four-wheeler is equipped with all the best components on the market.
Here are some benefits of upgrading your suspension system:
What you don't know about suspension on your ATV
When it comes to finding the best suspension for your Kawasaki ATV, many riders turn to popular brands. From shocks and struts to springs, these trusted companies offer reliable options that support your vehicle’s performance and longevity.
Fox Racing Shox has been around since 1977, offering aftermarket shock absorbers designed specifically for off-road racing vehicles. Their products are known for their quality construction and durability, making them great long-term investments for your ATV.
Elka Suspension offers state-of-the-art suspensions with adjustable damping capabilities. This allows you to customize how your bike handles different terrain as you ride, giving you more control over the experience. Elka also features unique designs which enable superior rider comfort and better riding stability.
Walker Evans Racing is another company that specializes in high-performance suspension systems made just for ATVs. They provide excellent handling ability on all types of terrain, from sand dunes to mud holes. Plus, they come preloaded with race settings so you can get right out onto the track without any hassle or delay!
Finally, QuadBoss makes high-end suspensions built tough enough to stand up against whatever mother nature throws at them while being comfortable enough for extended trail rides. If you’re looking for top-notch protection but don’t want to sacrifice comfort then QuadBoss might be the brand you should choose when shopping around for an ATV suspension system.
Customizing your ATV is a rite of passage in the off-road world and essential if you want to ensure a comfortable and enjoyable ride. At Perfex Industries, we recognize the importance of modifying your ATV to fit your needs, which is why we offer a wide range of ATV accessories to help you create the perfect vehicle. From suspension lift kits to skid plates, we have everything you need.
If you are looking to customize your Kawasaki ATV, we stock parts for the following makes:
]]>However, not all suspension systems are created equal, and finding the perfect fit for your Honda ATV can be a daunting task. When it comes to upgrading your Honda ATV's suspension, there are several factors to consider, such as riding style, terrain, and budget. In this article, we break down the different types of suspensions available for Honda ATVs and provide helpful tips to help you make an informed decision on which suspension upgrade is best for you.
An ATV suspension is an indispensable part of any all-terrain vehicle owner’s equipment. Its heavy-duty components help reduce impacts from rough terrain, providing a much smoother ride overall. From seat height to shocks and dampers, it all works together to make your ride as comfortable as possible.
Shock absorbers are widely used and are designed with solid steel components that absorb the impact from uneven surfaces while also providing a smoother ride in general. Compression damping helps reduce low-speed impacts from rocks and bumps, giving superior handling of rough trails. Additionally, compression damping reduces body roll for more stable cornering at higher speeds, making it perfect for those who want to tackle diverse and challenging terrain.
When it comes to finding the best suspension for your Honda ATV, understanding what type of suspension is available is key. Let's take a look at some popular options and features that may help you determine which one is right for you.
Independent rear suspensions are becoming increasingly common in modern ATVs, such as the FourTrax. This setup utilizes two separate shocks, one on each side of the rear wheel, along with adjustable springs for optimal ride comfort and handling performance. Additionally, independent suspensions usually offer up to 11 inches of suspension travel, making them suitable for even the toughest off-road trails.
Rear shocks play an important role in providing smooth rides over harsh terrain. They typically feature adjustable damping settings, allowing riders to dial in their desired level of cushioning and responsiveness. For those looking to tackle more extreme conditions, there are models with beefier construction and bigger shock absorbers that provide greater stability when navigating rough ground or larger obstacles. Many rear shocks come with increased ground clearance up to 12 inches, giving your ATV extra protection from impacts while maintaining its agility and maneuverability.
Having the right suspension on your Honda ATV can make all the difference when it comes to navigating rough terrain. The best suspension system provides you with an independent rear suspension, dual-clutch transmission, and adjustable ride height. This results in a smooth and comfortable ride. Here are some of the key benefits of opting for a suspension upgrade:
This allows each wheel to move independently from one another over uneven surfaces. That means less power is wasted as you go over bumps or dips in the road, allowing for greater energy efficiency with every turn of the engine.
The main benefit of upgrading your suspension kit is the fact that you will notice that your ride is far smoother. Off-road vehicles go through a lot of difficult terrains, with lots of bumps and uneven surfaces, but a quality suspension system will mitigate the effects of these intense roads with increased inches of ground clearance, which will leave you with an enjoyable riding experience.
The DCT system provides a seamless transition between gears so you don't have any jerky movements while making turns or accelerating. It also gives you better control over how quickly you accelerate so no matter what kind of riding conditions you're dealing with, you'll always have maximum traction at all times.
The importance of proper shock absorbers for ATVs cannot be overstated, especially when it comes to rider safety. Equipping an ATV with a good set of shocks will not only result in improved damping qualities and a smoother ride, it can also increase wheel travel, allowing the rider to better counteract uneven terrain and potential hazards like bumps or loose gravel. Adjustable preload options can further customize the suspension by allowing riders to restrict travel if needed. All these components contribute to creating a safer ride, essential for even the most experienced riders.
Suspension systems for your ATV
When shopping for a suspension system to upgrade your ATV, it's important to evaluate the specific needs of your vehicle. From four-wheel independent suspension systems to an independent double-wishbone front suspension, understanding these components is key when considering performance and ride quality.
One factor to consider is vehicle speed. All-terrain vehicles often require larger shocks capable of handling higher speeds while still providing stability and control over rough surfaces. Disc brakes are another important component that helps ensure safe stopping power at high speeds. For superior braking power, some ATVs feature triple-disc brakes.
The axle design used on each side of the wheels can also affect overall performance when trail riding. Full-time 4WD vehicles with low-speed compression damping provide smoother rides even in rough terrains like mud or sand dunes, making them perfect for Honda’s FourTrax Rancher model. In addition, this type of axle design helps prevent wear and tear on the drivetrain parts as well as improve traction and reduce skidding risks.
Choosing the right suspension setup for your ATV requires careful consideration of all aspects such as size, weight capacity, engine output, and terrain conditions you will be riding on most frequently. Taking into account all these factors along with any desired upgrades can help make sure you get the best possible experience out of your machine!
Upgrading your ATV suspension is an important step in enjoying a more exhilarating ride. Before taking this step, there are a few factors that need to be considered to make sure you choose the best option for your vehicle and needs.
Below is a list of factors you should consider before choosing an ATV suspension:
When it comes to upgrading your Honda ATV suspension, there are many cost considerations that you need to take into account. Electric starting, automatic transmissions, automatic clutch, and automatic mode can all add up quickly in terms of costs.
It's essential to remember that not all upgrades are equal, some will ultimately be more expensive than others so research and careful consideration are key when deciding what works best for your individual needs. Taking the time now to review available options could save you money in the long run.
Customizing your ATV is an essential element of the ATV riding experience. If you want to achieve a ride that is perfect for you, you will need to make some aftermarket adjustments to your vehicle. At Perfex Industries, we understand how essential ATV customization is, which is why we are dedicated to selling high-quality parts to improve and upgrade your vehicle.
We offer a range of products, from lift kits to skid plates for different ATV makes and models. For Honda ATVs, we offer parts for the following vehicles:
]]>An ATV suspension is essential for any off-roading enthusiast. It works to absorb impacts from the ground or sharp turns and provide a smooth, controlled ride. The way this is achieved is primarily through shock absorbers and springs.
Shock absorbers work to absorb as much of the impact on your vehicle as possible so you don’t feel every bump along the road. Every time you ride over a rock or crash down onto a trail after clearing a jump, the shock absorbers soak up most of the impact, preventing you from feeling its full effect. Additionally, springs help contain shocks on jumps or hard landings and improve control over how the ATV moves while driving. Properly adjusted shock absorbers and springs can help reduce wear and tear on your ATV while allowing it to travel distances in comfort.
When it comes to suspension systems for Yamaha ATVs, there are several different types available. Some of the most popular include independent suspensions, a-arms, and factory shocks. Each has its own advantages that can affect ride quality and overall performance.
Independent suspensions offer great off-road capability because they allow the wheels to move independently from each other. This allows them to absorb more impact without transferring too much shock through the frame or chassis. However, they tend to be expensive compared to other suspension options.
A dependent suspension system is one in which springs and shock absorbers are connected between a frame member or axle. This allows only one wheel to move up or down at a time relative to the other wheel, thus offering both wheels more ground traction. It is less comfortable for passengers as it does not level out over bumps.
Air-adjustable shocks are a popular type of suspension system for ATVs that involve the use of air pressure within a shock absorber for greater customization of the ride by increasing or decreasing the firmness on different surfaces.
Coil-over shocks are found on a wide range of vehicles. They are made up of a shock body, a coil spring, and mounting hardware. The springs provide support to the chassis and absorb impacts from bumps in the road, while the shock absorbers dampen these impacts for better ride comfort.
Gas-charged shocks are a type of suspension system fitted in ATVs that use pressurized gas contained within an inner cylinder to reduce the amount of energy being absorbed by the vehicle body. They are a great choice if you want to improve your ride, but they are a more expensive option.
Hydraulic shocks are suspension components that use pressurized liquid to absorb and reduce shock from obstacles in the wheel path. They are commonly used not only in ATVs but also in cars, motorcycles, boats, and other vehicles to dampen the vibration of the wheels as they travel over bumps or terrain. Hydraulic shocks improve ride comfort and the control of the vehicle.
When it comes to choosing the right suspension type for your Yamaha ATV, there are a few factors that you must consider. After all, there are different types of suspension systems and not all of them are suited to your specific needs. It is therefore important to consider the factors below to ensure you buy the right aftermarket shocks for your Yamaha ATV.
Different terrains require different types of suspensions, depending on how rough or smooth they are. For example, if you're an off-road enthusiast who loves tackling more adventurous trails, with rough terrain, then a stiffer suspension will be best suited for your needs. On the other hand, if you prefer a smooth ride around town or through smoother paths, then softer suspensions may be a better option for you.
Another important factor when selecting a suspension system is your riding style. Knowing what type of rider you are, whether that be an aggressive rider or a more relaxed rider, will help determine which setup is ideal for your specific needs. Seeking out the adequate suspension for your type of riding is essential otherwise your vehicle will be uncomfortable and potentially dangerous.
In addition to the mechanical aspects of suspension upgrades, you need to consider the logistical factors of your upgrade. It is important to set a budget before setting out to the showroom floor as this will direct you toward the types of suspension systems you should be looking at. There are both cost-effective suspension setups and high-end expensive setups so you need to decide how much you are willing to spend on your aftermarket suspension.
Maintaining your ATV suspension is an essential part of keeping it running smoothly and safely. After all, the suspension keeps you in control over uneven terrain and ensures that your ride remains comfortable. Taking care of your ATV suspension can save you money down the line by avoiding costly repairs.
Here's how to keep it working optimally:
Personalizing your ATV is an integral part of riding as it ensures you feel completely comfortable in your vehicle. At Perfex Industries, we understand how important aftermarket customizations are to allow you to fully enjoy your riding experience. That is why we sell a wide range of accessories to customize your ATV.
We stock parts for a wide range of ATV brands, including Yamaha, Polaris, Honda, and many more. Our accessories include:
]]>When it comes to choosing the best suspension for your CF Moto ATV, there are a variety of options available. With so many choices, selecting the right one can be difficult but taking into account factors like wheel travel, ride quality, rebound damping level, and adjustability should help make finding the perfect setup easier.
To help you better understand your options, here’s a list the most popular types of suspensions on the market today:
No matter what type of CF Moto ATV suspension you choose, it’s important to ensure that it provides adequate support while still providing comfortable yet responsive handling during cornering and braking maneuvers.
The benefits of suspension systems range from additional inches of ground clearance to increased passenger seat comfort and more engine power. Let's take a look at some of the major advantages that come with installing a CF Moto ATV Suspension.
A higher-quality suspension system will give your ATV better ground clearance, allowing you to traverse over terrain without worrying about getting stuck or damaging components. This is especially important for off-roading enthusiasts who need extra clearance to navigate tight trails and difficult areas.
With an upgraded suspension setup, passengers have less body roll due to the additional inches of movement afforded in the vehicle. As a result, you stay comfortable during long rides and don't experience fatigue. In addition, electric power steering helps reduce driver effort when turning tight corners or making sharp turns.
Another key benefit to a quality suspension system is that it allows for greater cargo capacity as well as more torque (up to 7 feet). It also increases engine power by improving acceleration while maintaining stability even at high speeds. All these features ensure you can easily transport heavy cargo, making it ideal for individuals using their ATV for labor work.
When it comes to choosing a suspension for your CF Moto ATV, there are several factors you need to consider. The type of terrain you ride on, the amount of aggressive riding you do, and even the make and model of your vehicle can play an important role when selecting the right suspension setup. Here are the main factors that you should consider when looking for a new suspension system.
When shopping for new suspensions, the first factor to consider is the retail price. You should determine how much you are willing to pay for your shocks and choose accordingly, as prices vary between brands and types. Experts suggest choosing shocks in the neighborhood of $700 for the front and $800 for the rear, as these prices offer superior compression and ride comfort during trail riding.
When choosing shocks for trail riding, look for reputable brands. Ask people who have bought them before to get their feedback and check online reviews. Don't pick which shock you think is the best just because it was used by the fastest racer, find local pros who do frequent trail riding and get their advice. This will help determine how well the shocks will work for you.
You need to consider your needs before purchasing an aftermarket suspension system. Everyone rides their ATVs for different reasons, and those who ride for thrills will require a different suspension system than those that use their vehicle for farm workers who will need an increased towing capacity.
What you don't know about suspension on your ATV
Maintenance of your CF Moto ATV suspension is important to ensure that you get the best ride out of your vehicle. There are a few tips to follow when it comes to keeping up with maintenance on your ATV's suspension.
The first step is to make sure that all major manufacturers' parts and components used on the ATV are in good condition when you buy the vehicle. This includes checking for any signs of wear or damage, as well as making sure that all bolts, nuts, and other fasteners are tight and secure. Additionally, if you have an aftermarket product installed, like a USB port or an additional lift kit, these should be inspected regularly for proper functioning.
Another great way to maintain the performance of your ATV's suspension is to use quality products from reputable power sports manufacturers whenever possible. For example, using higher-end shocks specifically designed for off-road conditions can really help improve the overall ride comfort of your machine.
Lastly, don't forget about regular servicing. Making sure that wheel bearings are lubricated periodically will reduce friction and increase longevity while allowing the wheels to turn more freely on uneven ground surfaces. Having a qualified mechanic check over the suspension system at least once per year isn't only recommended, it's essential! Doing so helps identify potential issues before they become serious problems. Keeping up with routine maintenance checks can save you time and money down the road while ensuring optimal performance from your CF Moto ATV suspension!
Adding an upgraded suspension to your CF Moto ATV can be a great way to improve the overall performance of your vehicle, but it's important to consider safety first. Here are some tips to upgrade your CF Moto ATV’s suspension safely.
The most critical factor in any suspension upgrade is making sure that all parts are correctly installed and securely fastened. Before installing new components, check them against manufacturer specifications and make sure they fit well with each other. Don't forget to thoroughly inspect used parts as well before installation. If there are signs of corrosion or wear-and-tear, opt for a different part instead!
Your safety does not end when your suspension kit has been installed, you also need to ride responsibly for your vehicle to remain safe. This involves watching your speed at all times. Even when riding over rough terrain, pay attention to recommended speeds and keep it under control. This will help reduce the risk of injuries caused by unexpected bumps or changes in terrain.
To get the best out of your upgraded suspension without compromising safety, practice caution and stick within acceptable speed parameters. With correct installation and responsible handling, you'll be able to enjoy improved performance from your CF Moto ATV without putting yourself at risk.
Customizing your ATV can be a fun and rewarding experience. From suspension to engine performance upgrades and accessories, the possibilities are endless! At Perfex Industries, we stock a wide range of high-quality aftermarket ATV parts so that you can upgrade and personnalize your ATV. We sell different brands, offering parts, from CF Moto to Arctic Cat to Honda and many more.
The parts we sell include:
]]>
Suspension is an important component of any ATV, but especially for a Can-Am. The right suspension setup can make all the difference between a bumpy ride and smooth sailing over challenging terrain. Suspension travel, aftermarket shocks, and tri-mode dynamic power steering are just some of the features to consider when determining what type of suspension is best for your vehicle.
When it comes to making sure your ATV performs at its best, look no further than the TFX suspension. With up to 12 inches of ground clearance and 6 inches of wheel travel, its A-Arm front suspension offers superior stability while also providing better handling in any situation – whether that be tackling hills or navigating tight trails. Furthermore, this technology helps reduce rider fatigue by significantly smoothing out rough terrain as well as reducing steering effort by 30%.
By choosing the right suspension system for your Can-Am ATV based on your preferred type of riding, you’ll enjoy greater control and comfort during your adventures. Whether that means investing in reliable aftermarket shocks or taking advantage of advanced technologies like tri-mode dynamic power steering and TFX suspensions, having quality components under your feet will always result in a smoother ride no matter how challenging the terrain may be.
When it comes to choosing a suspension for your Can-Am ATV, there are plenty of factors to consider. From the type of trail you'll be riding on, to how much weight you plan on carrying in the back… each factor plays an important role in deciding which suspension is right for your ATV.
Let's start with rear suspension! If you're planning on taking your ATV out for long rides over rough terrain and/or tackling steep inclines or declines, then having some sort of extra shock absorption is important. A stock suspension system usually consists of two basic components: a rear arm and a spring that connects both sides together. However, depending on what kind of power and ability your machine has, investing in something like a travel suspension might prove beneficial as it provides more control when going over uneven ground and better stability when hauling heavy loads.
The front end also needs adequate suspension to handle the bumps efficiently. This is where an A-arm front suspension comes into play. This setup allows for maximum flexibility by utilizing shocks mounted at both ends of each lower arm. Not only does this give you enough room for turning corners without causing too much strain but it also helps keep all four tires firmly planted during acceleration and deceleration. Choosing the right suspension system isn't always easy but getting familiar with all the available options can help ensure that your Can-Am ATV remains safe while maximizing its potential performance capabilities!
Understanding the benefits of different suspensions is essential in order to make an informed decision and get the most out of your all-terrain vehicle.
First off, it's important to understand how shock absorber settings can affect ride quality. It’s possible to add additional shock travel which will give you more dynamic power steering on rugged terrain. Heavy duty springs (HD Springs) also allow you to customize spring settings according to individual needs – making them ideal for those who regularly tackle more challenging conditions than factory standard vehicles can handle.
In terms of increasing performance, there are several options available when choosing what type of suspension arms or shocks should be installed on your machine. For instance, adjustable sway bars provide greater control over pitch and roll motion while upgraded dampers help reduce body movement, allowing better stability through corners and improved overall handling. As for heavy-duty springs, they are designed specifically for tough terrains and high speeds, enabling maximum traction.
Whether you're looking for increased comfort or serious performance gains, understanding the potential benefits of different types of suspension components is essential before making a purchase. With so many options on the market today, careful consideration must be given in order to ensure that you buy the right product (one that suits your budget and riding style!).
When it comes to ATV suspension, the cost is always a consideration. You want the most cost-effective setup for your ride that will still give you adequate performance on the trails. Stock suspension arms are not going to be up to par with more customized setups but they can get you out on the track faster and cheaper if budget is an issue. Rear wheels also play an important role in handling the vehicle. Alloy or aluminum beadlock wheels provide superior grip over stock rubber tires and may cost more depending on which ones you choose.
The question of which suspension components are best for a Can-Am ATV can be tricky. Shock absorbers and springs, the primary parts of any suspension system, play an important role in how your vehicle handles various terrain. While cost is certainly a factor to consider when selecting these components, you also need to think about other aspects such as maximum grip, amount of ground clearance, inch of suspension travel, and control arms.
When it comes to shock absorbers, there's no one-size-fits-all solution. Depending on the size and power of your engine, you'll have different needs. The same goes for rotax engines found on Can-Am vehicles. They come equipped with dual A-arm suspensions that provide added stability and ride quality along with additional plastic skid plates for protection against anything Mother Nature throws at them.
No matter what type of engine you have under the hood or what kind of terrain you're tackling, having properly fitted shocks will make all the difference in terms of performance. They will help keep your wheels firmly planted onto the surface while allowing just enough flexibility so that they don't become rigid during bumps or jumps.
Investing in aftermarket shocks specifically designed for your machine can provide superior dampening capabilities while also improving handling characteristics over stock ones. Furthermore, adding an hour meter to track progress can give you insight into how well everything is working together.
When it comes to getting the most out of your suspension, Can-Am ATVs have a great reputation. When you're off-roading in rough terrain, these vehicles are perfect for navigating even the toughest surfaces with ease and comfort. Whether you're on a hunting trip or just enjoying some fun in the outdoors, having an amazing ride is essential.
Here are tips to get the most out of your suspension:
Riding an ATV is all about creating an experience that is perfectly suited to you which means customizing your vehicle is a must. At Perfex Industries, we are committed to bringing you the highest quality ATV accessories, from lift kits to wheel spacers!
We sell accessories for a range of different Can-Am models including:
]]>An ATV suspension is a feature designed to ensure you experience a smooth ride as the elements work to absorb the impacts that you experience on the trails. There are several factors that make up an ATV suspension such as seat height and rear shocks.
Shock absorbers are designed with solid steel motorcycle shock components that absorb impact from uneven surfaces while providing a smoother ride. Compression damping helps reduce low-speed impacts from bumps or rocks, giving superior handling when riding over challenging trails. Low-speed compression damping also reduces body roll for more stable cornering at higher speeds - perfect for those who want to push their ATVs beyond traditional boundaries!
The right combination of these features makes all the difference when taking on extreme terrain with maximum precision and agility. Whether you're looking for better handling on tight turns or improved stability during long rides, having a clear understanding of what suspension works best for your specific needs will ensure that you get the most out of every adventure.
ATV accessories for your Suzuki
If you own a Suzuki ATV, then you know that the suspension is an essential feature. Upgrading your ATV’s suspension can be beneficial in numerous ways, offering more control and comfort when riding through tough terrain. Let’s take a look at some of the benefits that come with upgrading your ATV suspension system.
When it comes to improving performance and ride quality on your off-road vehicle, steel motorcycle shock absorbers are one of the best investments you can make. With adjustable spring preload settings and rear brakes, these shocks will give you improved handling for all types of riding styles. Plus, many models offer increased ground clearance thanks to their remote reservoir design.
In addition to improved dampening qualities, there are other benefits that come from investing in a good set of shock absorbers such as extra inches of wheel travel and adjustable preload options. Not only does this make for a smoother overall ride, but it also increases riders' safety by keeping them firmly planted on the ground during rough patches or tricky turns. For those looking to get even more out of their Suzuki ATV experience, accessories like shock upgrades can really help unlock its true potential.
There are different types of ATV suspension out there so it can be overwhelming to know which one is best for you. Whether you’re looking at installing a new system or just trying to make an existing setup more comfortable, understanding the various features will help you find what works best for you.
The first option to consider is rebound adjusters. Rebound adjusters allow users to customize their ride by controlling how quickly the shock returns after being compressed. This feature can be adjusted on most shocks, but some high-end models offer additional adjustment options like compression damping and adjustable preload settings. Hydraulic discs are also popular on ATVs as they provide superior braking performance in tight terrain situations.
Monotube shocks are a popular choice for ATV vehicles due to their ability to absorb bumps and vibrations on the road. The shock has an oil reservoir built into it which helps reduce friction as the shock moves back and forth. However, this can also be a disadvantage because the oil can heat up over time due to the friction of the shock's movement. This can cause damage to the shock over time, leading to decreased performance and even complete failure.
Remote reservoir shocks are a great way to upgrade the suspension of your vehicle. They are connected to the shocks by a tube, allowing you to put the reservoir anywhere on your vehicle. This is beneficial because it keeps the shock cool and prevents it from foaming up like regular monotube shocks. This type of remote reservoir has several advantages over traditional monotube shocks, such as improved cooling, increased oil capacity, and better damping control.
Upgrading your ATV suspension is important to enjoy a more exhilarating ride. As with any change to your vehicle, there are multiple factors to consider before deciding on what type of upgrade is right for you.
When looking at an ATV suspension upgrade, one of the primary considerations should always be how it will affect the center of gravity and weight distribution of the machine. Most vehicles come with adjustable shocks and springs so they can easily accommodate different rider weights and styles. However, suppose your ATV is outside of the traditional model. In that case, you need to put additional consideration into the vehicle and weight distribution and think about how your suspensions will accommodate these differences.
Another factor worth considering when upgrading your ATV suspension is whether or not it'll fit within your budget constraints. After all, some models may require a complete overhaul which could end up being quite expensive depending on the parts needed and the labor involved. Additionally, bear in mind that quality components don't necessarily come cheap so do your research.
On average, you should look into changing non-adjustable suspensions every six years. However, it's essential to understand that ATV suspensions can vary greatly depending on what kind of terrain you ride. Ultimately, it's up to each rider to decide how often they should upgrade their parts.
Looking at factors such as wear-and-tear or rating reviews by other riders who have had similar experiences with specific setups will inform you of the best time to replace your ATV suspension. An increased suspension setup could improve safety while maximizing performance!
Each model of Suzuki ATV benefits from a different suspension type, making it impossible to highlight a single front runner for the best Suzuki ATV suspension. For those looking for the best suspension for a Suzuki ATV, there is no shortage of options, so you’ll be sure to find something within your budget.
By doing some research into the various suspension types available for your make and model of Suzuki ATV, you can increase the performance capabilities of your ride while ensuring it provides maximum support during high-speed rides over rough terrain.
The cost of an ATV suspension upgrade can vary depending on different factors such as the vehicle and suspension type. However, on average, you can expect to pay anywhere between $150 to $300.
It is not an expensive upgrade and it can make a massive difference to the overall safety and quality of your ride. You also have the option to only upgrade certain elements of your suspension, which is cheaper. However, a full suspension upgrade is always recommended.
Personalizing your ATV is a guaranteed way to ensure you achieve the riding experience you want, which is why Perfex Industries is dedicated to providing you with the highest quality ATV accessories. We stock a wide range of customizable accessories from lift kits to wheel spacers.
When it comes to accessories for Suzuki ATVs, we sell accessories for different Suzuki models such as:
]]>
Using a suspension is highly recommended for the Polaris. In fact, Polaris is often considered an industry leader in suspension, due to the fact that in 2006, the company brought out the Polaris Outlaw, the first-ever sports ATV to come with independent rear suspension.
A favorite among riders since its launch, this groundbreaking vehicle was considered a revolutionary modification to the already popular Polaris quads. Polaris has, therefore, always been aware of the benefits of adding suspensions to its vehicles. However, there is nothing stopping you from seeking out additional modifications if you want to further improve the suspensions on your vehicle.
Shop for suspension accessories
An ATV suspension works by absorbing the impacts along your ride, and providing you with enough jumps in your car to ensure that you don’t feel the bumps in the road. The way this is achieved is primarily through shock absorbers and springs.
Shock absorbers work to absorb as much of the impact to your vehicle as possible. Every time you ride over a rock or crash down onto a trail after clearing a jump, your vehicle experiences shocks. Luckily, the full effect of these shocks doesn’t reach your body, as the absorbers take as much of the impact as possible.
Springs also work to contain the effects of bumps and jumps along the trail, but they aim to improve the movement in your vehicle. Without spring spacers, your vehicle would continuously experience harsh landings, and you would be more likely to injure yourself.
There are multiple parts that make up an ATV suspension system. It is important to understand what they all are, because if you are unhappy with the overall suspension and ride of your vehicle, you can modify the specific elements responsible for your dissatisfaction. This is more convenient and economical than modifying the entire apparatus.
Here is a list of the main parts of an ATV suspension system:
What you don't know about suspension on your ATV
The Polaris favors rear independent suspension. This form of suspension is ideal for the thrilling off-road driving for which Polaris vehicles are often used. It allows each wheel to move independently. The ATV rear suspension shock is ideal due to the fact that the back of the vehicle usually takes the majority of the impact when riding.
If your suspension is too high, you need to lower the entire system. The best way to do that is by buying custom shock absorbers. Alternatively, you can also adjust your overall ride height by adjusting the preload.
Raising the preload will leave you with a tighter suspension, stiff shocks, and a high ride height, whereas lowering the preload pressure will loosen your suspension, with the result that you will achieve a lower ride height.
If you own a Polaris and are looking to upgrade or customize your vehicle, PERFEX is here to help. We are a Canada-based company that is dedicated to manufacturing ATV and UTV accessories. Using only the highest quality materials, our products ensure that your vehicle is upgraded to the highest level.
We stock a range of parts for a variety of Polaris models. From standard models to expensive models, we have accessories for every kind of vehicle. We sell lift kits, wheel height spacers, skid plates, and suspensions.
]]>
The component that enables these vehicles to deal with such terrain is the suspension. It works to mitigate the effects of any bumps in the road, resulting in a smoother and more enjoyable ride. In this article, we explain everything you need to know about Arctic Cat ATV suspensions and the role they play in enhancing your driving experience.
An ATV suspension is the component of an all-terrain vehicle that ensures that it is able to handle rough terrain. n ATV suspension, compared to that of regular cars, is far more substantial, as off-roading presents more bumps, ditches, and obstacles than a flat road. As a result, it provides stability when riding on rough and uneven terrain.
There are two main components to an ATV suspension: the shock absorber and the spring. The shock absorbers help minimize the intensity of shocks. For example, if you were to drive over a rock, your shock absorbers would take in the majority of the shock, with the result that you would be protected from much of its impact. This helps make your ride as smooth as possible. One of the key logistical elements required to make shock absorbers work is oil. By lubricating them, you prevent them from compressing. If compressed, they are unable to absorb shocks.
The second component of the suspension is the spring, which is used to prevent compression. When your vehicle experiences an intense bump or shock, a spring will momentarily compress and then spring right back into its original position. It is essential to ensure that the springs in your vehicle are strong, as heavier spring tension will prevent your ATV from jumping back, and you will feel the full force of shocks.
An Arctic Cat's suspension system is made of a series of different components. If you are looking to upgrade your suspension system, you have the option to upgrade the whole thing or focus on specific parts.
Here is a list of all the parts in an Arctic Cat ATV:
What you don't know about suspension on your ATV
ATVs are extremely customizable, which is why there are a multitude of options available for Arctic Cat suspensions. The suspension you choose will ultimately depend on your needs as well as your driving style. Below are some of the most popular suspensions on the market to elevate your Arctic Cat riding experience.
An independent suspension system is preferred by most ATV drivers, as it allows each individual wheel to function independently. Although the wheels all use the same axle in this system, they don’t rely on each other to move.
An independent rear suspension with a rear back shock absorber is a popular form of suspension, because if you are riding your ATV correctly, the back of the vehicle will experience the most amount of impact. For the smoothest ride, we suggest equipping your Arctic Cat with an independent system.
At the other end of the spectrum, there is the dependent suspension system, where all the wheels on the vehicle are connected. All the components of this suspension system are connected by a frame/axle. A dependent system is usually recommended for vehicles that won’t be encountering rough terrain, as it is primarily designed to keep all four wheels on the ground. However, when off-roading on an ATV, you need the freedom to be able to gain air and traction, which this system is not designed to accommodate.
Aftermarket shock absorbers are extremely popular when it comes to upgrading and customizing your ATV. Below are some of the most reputed shock absorbers on the market.
You will find this type of stock shock absorber on most ATVs, because it is the most well-rounded. Although it can’t be adjusted, it has impressive springs with high absorption capabilities, allowing your vehicle to easily deal with intense shocks.
This form of shock absorber is perfect for new riders. It comes with preloaded shock settings and a locking system, creating a more consistent riding experience.
These shock absorber suspension systems are recommended for experienced riders, because they are the most complicated. They are also the highest quality products on the market, and, by extension, the most costly. Many premium brands come with this system already installed in the vehicle.
We recommend installing an independent suspension system. These systems afford your vehicle more flexibility than dependent suspension systems. This is essential when off roading.
Although an independent system is better for dealing with irregular and uneven terrain, you do need to be aware of its limitations. Independent systems don’t do well with heavy loads, which means that if you are planning on using your ATV for work purposes and need it to transport cargo, its effectiveness will be limited.
Upgrade your ATV with Arctic Cat accessories
You can expect the suspension of your ATV to last, on average, from 20,000 to 30,000 miles, or five years, whichever comes first. As you drive your ATV, all the elements of your suspension will begin to wear down. You therefore need to stay on top of suspension care.
One of the most important components of your ATV is its suspension. The type of suspension you install on your ATV will dictate how well it rides and influence how enjoyable your riding experience is. The same is true for all your ATV’s components which is why it’s important to consider customizing your Arctic Cat ATV and fitting it with unique components.
If you want to upgrade your Arctic Cat, Perfex Industries is here to help. We stock a variety of Arctic Cat ATV accessories, for a variety of Arctic Cat ATV models. We sell accessories for the following Arctic Cat models:
]]>
Although there are many safety rules for jumping your ATV, they are fairly easy to master. Below are some of the most important factors that you need to consider when quad jumping.
The most important thing you need to know before quad jumping is whether or not you are ready for it. If you do not feel 100% confident in yourself and your driving abilities, you should not be quad jumping. Confidence is key, and without it, you will constantly doubt yourself on the circuit. This can lead to bad decisions that might be dangerous or fatal.
It is recommended that you begin quad jumping only after you have substantial riding experience. Riding on rough terrain alone can be dangerous so when you hit a circuit with the intention of jumping and doing tricks, you increase the danger level. You should only try quad jumping when you are confident in your riding abilities.
Don’t even think about guad jumping if you don’t have the necessary safety gear. In most cases, the basic safety gear that you use for your everyday riding will suffice. The piece of safety gear that you should absolutely use is a helmet. It is also essential that your helmet properly fits. It should be fairly tight on your head with no movement. While the best option is to get a helmet with a built-in visor, you can use motor-cross style glasses to protect your eyes from flying debris.
Additional safety gear that you should invest in include:
Everything you need to know to avoid ATV accidents
Now, on to the riding itself. There are certain tips that will make for a smoother ride and improve your jumping technique. The first thing you need to think about is your wheel position as it will make a big difference in how you land your all-terrain vehicle. When landing, you need to ensure that your front wheels are higher than your back wheels. That way, the back of your bike will take the majority of the impact of your landing, and you can smoothly bring down the front wheels to keep riding.
Body position is an important element of the quad and dirt bike riding experience. When jumping, you should not be sitting on your cushioned seat, but standing. The reason you need to stand when landing jumps is because your legs provide you with extra suspension. A large amount of an ATV’s suspension is in the seat, which means it is dangerous to be sitting in it when the suspension is in use.
Once the seat has been compressed due to the suspension, it needs to come back up. The resulting rebound can eject you from the vehicle if you are still sitting on the seat when this happens. By contrast, when you stand, your legs act as the suspension, and you won't be thrown off your bike. Moreover, when you are standing up, it makes it easier to move, and you can use your body weight to properly position your bike for take-offs and landings.
Keeping the left and right side of your vehicle level is important when jumping. If you tilt, your landing will be uneven, and your quad will flip over on to one side, which could lead to serious bodily injury. If you notice that your quad is tilted while you are in the air, you can easily fix the problem. All you need to do is shift your body weight to the side of your vehicle that is higher. This should even out the weight distribution of your ATV and straighten it out, thereby preventing you from hurting yourself.
Getting your jumping angle right is essential. The good news is that once you have figured out the best angle, getting your quad into position is actually fairly easy. The best way to do this is by testing the angle on smaller jumps. Do not commit to huge jumps without first knowing the right angle you need to get your bike into. Bear in mind that each quad bike is different. Therefore, even if you are a seasoned driver, you have to test out the angle every time you use a new vehicle.
In order to test the angle, you need to make sure your ATV is at a speed that is reasonable. Then, once you approach the jump, you need to move your body weight slightly to the back of the vehicle. You want to be able to lift the front wheels off the floor first, keeping your rear wheels fairly low. Once those front wheels are up, keep consistent pressure on your throttle, so that you don’t lag down. This technique will allow you to find the angle that you need to hit in order to get your ATV off the ground.
Customize your ATV for maximum comfort and efficiency
Quad riding and jumping is a fun sport. Apart from the riding experience it offers, it is also an opportunity for self-expression. Which is why vehicle customization is such an inherent element of the sport. Riders take it upon themselves to customize their vehicles in a way that shows who they are and allows them to ride in a manner of their choosing.
Perfex Industries has worked alongside riders for years. We supply riders with a range of quad and ATV accessories. The main accessories we sell are:
]]>
Valerio De Simoni, Kristopher “Ted” Davant, and James Kenyon are the joint record holders for the longest ever journey on an ATV. The world record was set in 2010 and no one has come close to breaking it since. The three Australians set out for the record-breaking journey on August 10, 2010. They named their quest the Quad Squad Expedition.
The journey lasted 437 days, 19 hours, and 9 minutes in its entirety. It totaled 34,945 miles and allowed the three to see some beautiful sights along the way. They traveled through 37 different countries, starting in Istanbul, Turkey and ending in Sydney, Australia.
Although the ATV community is a strong one, getting together enough people to break a world record is difficult. Nevertheless, the Rocky Mountain ATV Jamboree from Richfield, Utah managed to get together a group big enough to set a brand new world record for the largest parade of ATVs. This is a record that was set over 10 years ago and has not been broken since. The parade was on the 16th of September, 2009 and began with 1,947 people. However, a few people gave up on the way, leaving the final head count at 1,870.
Once again, Utah takes center stage for ATV world records. On the 17th of November, 2008, Travis Patrana and Eric Roner got together to break the record for the longest tandem ATV jump. The stunt was performed for the MTV show Nitro Circus and was aired in January 2009. A tandem jump is a jump that involves a primary rider of the ATV and a passenger. This particular record was a ramp jump, during the course of which the two men drove up the ramp in order to gain the traction for their 15.99 m (52 feet), 6 inch jump.
The record for the greatest distance cycled on a mountain bike in 24 hours goes to Adrian Ellul of Australia. Ellul completed this impressive task overnight from the 9th to the 10th of October, 2015. He was able to travel an amazing 577.78 km, or 359.02 miles, in the space of only 24 hours. In order to complete this challenge, Ellul used a Giant XTC mountain bike, and rode through McLennon Park in Queensland, Australia.
Adrian Ellul holds the record for longest distance traveled in 24 hours on a mountain bike. But who holds the record for the longest distance traveled in 48 hours? Well, that would be Adrian Ellul once again. While he was doing his 24-hour stint, he decided to double the time and see how far he could go in 48 hours. During the entire 48-hour period, Ellul managed to cover a whopping 1,004.41 km, or 624.11 miles. In other words, 426.63 km more than the distance he traveled while breaking the 24-hour record.
Zydrunas Savickas of Lithuania broke this world record on the television program Lo Show dei Record in Milan. The show focuses on individuals who have broken or are trying to break world records. Mr Savickas was able to lift the quad bike over his head 14 times in the minute he was given. Quite the achievement when you think about how heavy a quad bike is!
While the longest motocross bike jump was achieved by Robbie Maddison, who jumped 322 feet 7-1/2 inches over the length of a regulation football field, the record for the longest motocross bike jump with a backflip goes to mountain biker Cam Zink. Zink was able to jump 100 feet and three inches for this mammoth backflip. He completed the task at California's Mammoth Mountain Ski Area by descending down a 910-foot approach before gaining his 100-foot backflip jump at speeds of 48 mph.
Which ATVs are the best for summer riding adventures?
There are a few different subcategories for the longest wheelie on an ATV. People have completed this world record in various ways. For example, you have the record for the ATV wheelie with the most number of people. This involved 17 people squeezing into an unmodified Honda 350 Fourtax ATV. They were able to complete a single wheelie over a distance of 50 meters on the Riverglade Speedway in New Brunswick, Canada.
Similarly, the longest backwards ATV wheelie was completed by Roger LeBlanc, who was also in the vehicle that broke the record for the wheelie with the most people. He managed to travel 1,579.675 m on his own bike, doing a wheelie along the same New Brunswick highway.
The longest ATV side wheelie was achieved by Yannick Dupont, a French stuntman who managed an amazing 21.30 miles using only his side wheels. However, the star of the show, the man who managed to break the world record for the longest individual wheelie, is Abdulla Al Hattawi of the UAE. Al Hattawi rode his ATV on its two back wheels for 37.28 miles. In other words, the equivalent of just over 656 football fields.
Jon Guetter holds the record for the longest ramp jump on a quad bike. He performed the feat in Melbourne, Australia in 2008. The record has remained unbeaten to this day. Guetter jumped 53.92 m (176 ft 11 in) at the Calder Park Raceway. The previous record is held by Matt Coulter who jumped 40,9 meters over 14 Honda CRV vehicles.
Roger LeBlanc, undoubtedly the king of wheelies, has yet another world record to his name, namely the longest triple wheelie. This time, he brought his family along, and together, Roger, Madelaine and Dominique LeBlanc achieved the feat. They broke the record on the 12 of November, 2011 traveling 1,217.07 meters.
The record for the fastest ATV speed goes to Terry Wilmeth of Oregon, USA. He was able to get up to speeds of 196.19 miles per hour on his Yamaha 700 Raptor in 2008.
While there are some truly impressive ATV world records out there, you do not have to jump hundreds of feet in the air or travel at speeds of just under 200 miles per hour to have a good time with your vehicle. ATV riding is all about finding what works for you, so that you can enjoy the ride. A key way to achieve this is to customize your ATV.
Perfex Industries sells a wide range of ATV accessories that are suited for a variety of ATV models. Our accessories include:
]]>